an8288w0001c

Retrofit toll system

Typ an · téma 82.88 · verze 0301 · 2012-02-15

Platí pro: MODELS 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 472726 with CODE (F04) Cab L (long) with CODE (DD2) Cab with 1550 mm floor-to-ceiling height except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter) except CODE (DD3) Lowered cab with low roof except CODE (S28) Center seat with seat belt Grundig toll system in vehicles with MTCO tachograph MODELS 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 472

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 82 Elektrické zařízení, nástavba › 82.88 Systém silničních poplatků — Řada 950 (modely 0**, 1**, 2**, 3**) · Řada 952 (modely 0**, 1**, 2**, 3**) · Řada 953 (modely 1**, 3**) · Řada 954 (modely 0**, 1**, 2**)

EinPAS 31 Komunikace/informace/zábava › 31.35 Tachograf/systém výběru mýtného › 31.35.3 Dodatečná montáž/přemontování — Řada 950 (modely 0**, 1**, 2**, 3**) · Řada 952 (modely 0**, 1**, 2**, 3**) · Řada 953 (modely 1**, 3**) · Řada 954 (modely 0**, 1**, 2**)

AN82.88-W-0001C

Retrofit toll system

14.2.12

MODELS 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 472726
with CODE (F04) Cab L (long)
with CODE (DD2) Cab with 1550 mm floor-to-ceiling height
except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter)
except CODE (DD3) Lowered cab with low roof
except CODE (S28) Center seat with seat belt
Grundig toll system in vehicles with MTCO tachograph

MODELS 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 472726
with CODE (F05) cab M (medium-long)
except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter)
except CODE (S28) Center seat with seat belt
Grundig toll system in vehicles with MTCO tachograph

MODELS 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 472726
with CODE (F07) cab S (short)
except CODE (S28) Center seat with seat belt
Grundig toll system in vehicles with MTCO tachograph

Retrofit toll system

W82.88-1042-06

Shown on model 954 with

Code (F04) cab L (long)

and code (DD2)

Cab with 1550 mm floor-to-ceiling height

1 Multifunction antenna

2 On-Board-Unit
(toll acquisition device)

3 DSRC communication module

Retrofit toll system

W82.88-1034-05

Connection diagram

2 On-Board-Unit
(toll acquisition device)

3 DSRC communication module

A7 Base module

A30 WS/FSS control unit

F2 Tml. 58 fuse

FA Fuse toll system, term. 30

Fb Fuse toll system, term. 15

GPS GPS antenna

GSM GSM antenna

P1 MTCO tachograph

Modification notes

15.7.04

Wiring diagram modified.

Install

1

Install backup battery in toll acquisition device

AN82.88-W-0001-13A

2

Store vehicle and customer data with the service PC in the On-Board-Unit
(toll acquisition device) (2)

The procedure on the service PC can be obtained from the documents from the course "Installation of vehicle device" of the Toll Collect company.

3

Switch off ignition

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

4

Disconnect ground lead from battery

Notes on battery

AH54.10-P-0001-01A

5

Remove footwell paneling on driver's side

AR68.30-W-1310A

6

Remove interior lamp at driver side

7

Remove modular tachograph (MTCO) (P1)

AR54.61-W-0003A

8

Move tachograph shaft cover from housing box

9

Remove speaker at driver side

10

Remove paneling from A-pillar at driver side

The support rod must be reattached for the duration of the installation process after removing the paneling.

AR68.30-W-4050A

11

Release instrument cluster and fold back

AR54.30-W-6027B

12

Open electrical compartment cover

13

Release base module (A7) and fold back

14

Install multifunction antenna (1)

AN82.88-W-0001-01B

*BA82.88-N-1001-01A

15

Install the extension cables for the multifunction antenna (1)

AN82.88-W-0001-02C

16

Install wiring harness for toll system

AN82.88-W-0001-03C

17

Attach toll system wiring harness to modular tachograph (MTCO) (P1)

AN82.88-W-0001-05B

18

Connect wiring harness for toll system in electrical compartment

AN82.88-W-0001-04B

19

Connect and install DSRC communication module (3)

AN82.88-W-0001-08B

*001589882100

20

Prepare console housing of on-board unit (toll acquisition device) (2) for installation and install

AN82.88-W-0001-09C

21

Adjust yaw rate sensor (gyro) of On Board Unit (toll acquisition device) (2)

AN82.88-W-0001-10C

*001589882100

22

Connect and install On Board Unit (toll acquisition device) (2)

AN82.88-W-0001-11C

23

Install remaining parts onto vehicle

24

Synchronize modular tachograph (MTCO) (P1)

25

Perform function check and road test

Antenna toll system

Number

Designation

Models 930/932/ 933/934/944/ 950/952/953/ 954/970/972/ 974/975/976

BA82.88-N-1001-01A

Hirschmann multifunction antenna
GPS 925/DCS on roof

Nm

7 (1)

Retrofit toll system

Protractor (electronic)

001 589 88 21 00

Parts ordering notes

Part no.

Designation

Quantity

--

Installation kit for Grundig toll system

1

B6 782 1169

Toll system bracket (ACTROS, models 950-954) low roof

1

Odkazované dokumenty