an8288w000109c

Prepare console housing for on-board unit for installation and install

Typ an · téma 82.88 · verze 0200 · 2003-08-15

Platí pro: MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 472726 with CODE (F04) Cab L (long) with CODE (DD2) Cab with 1550 mm floor-to-ceiling height except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter) except CODE (DD3) Lowered cab with low roof except CODE (S28) Center seat with seat belt Mautsystem Fa. Grundig in Fahrzeuge mit Tachograph MTCO MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 47

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 82 Elektrické zařízení, nástavba › 82.88 Systém silničních poplatků — Řada 950 (modely 0**, 1**, 2**, 3**) · Řada 952 (modely 0**, 1**, 2**, 3**) · Řada 953 (modely 1**, 3**) · Řada 954 (modely 0**, 1**, 2**)

EinPAS 31 Komunikace/informace/zábava › 31.35 Tachograf/systém výběru mýtného › 31.35.3 Dodatečná montáž/přemontování — Řada 950 (modely 0**, 1**, 2**, 3**) · Řada 952 (modely 0**, 1**, 2**, 3**) · Řada 953 (modely 1**, 3**) · Řada 954 (modely 0**, 1**, 2**)

AN82.88-W-0001-09C

Prepare console housing for on-board unit for installation and install

Modification notes

17.7.03

Procedure modified

Steps 1 to 5

Prepare console housing for on-board unit for installation and install

W82.88-1058-11

1 Remove protective foil from the support webs (4) of the bracket (3).

2 Insert bracket (3) into the housing box (2) and when doing so guide wiring harness (5) through the bracket (3).

3 Position bracket (3) on left and at rear in the housing box (2) and adhere to the bottom of the housing box (2).

4 Connect cover panel to the housing box (2).

W82.88-1113-11

5 Insert sheet-metal frame (1) through the opening in the cover panel (6) into the bracket (3) and bend the retainer tabs.