an8288w0001a

Retrofit toll system

Typ an · téma 82.88 · verze 0302 · 2012-02-15

Platí pro: MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 472726 with CODE (F04) Cab L (long) except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter) except CODE (DD2) Cab with 1550 mm floor-to-ceiling height Grundig toll system in vehicles with MTCO tachograph MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 472726 with CODE (F15) MEGASPACE cab Grundig toll system in vehicles with MTCO tachograph

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 82 Elektrické zařízení, nástavba › 82.88 Systém silničních poplatků — Řada 950 (modely 0**, 1**, 2**, 3**) · Řada 952 (modely 0**, 1**, 2**, 3**) · Řada 953 (modely 1**, 3**) · Řada 954 (modely 0**, 1**, 2**)

EinPAS 31 Komunikace/informace/zábava › 31.35 Tachograf/systém výběru mýtného › 31.35.3 Dodatečná montáž/přemontování — Řada 950 (modely 0**, 1**, 2**, 3**) · Řada 952 (modely 0**, 1**, 2**, 3**) · Řada 953 (modely 1**, 3**) · Řada 954 (modely 0**, 1**, 2**)

AN82.88-W-0001A

Retrofit toll system

14.2.12

MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 472726
with CODE (F04) Cab L (long)
except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter)
except CODE (DD2) Cab with 1550 mm floor-to-ceiling height
Grundig toll system in vehicles with MTCO tachograph

MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 472726 with CODE (F15) MEGASPACE cab
Grundig toll system in vehicles with MTCO tachograph

Retrofit toll system

W82.88-1013-06

Shown on model 954 with

Code (F04) Cab L (long)

1 Multifunction antenna

2 On-board unit
(toll acquisition device)

3 DSRC communication module

Retrofit toll system

W82.88-1034-05

Connection scheme

2 On-board unit
(toll acquisition device)

3 DSRC communication module

A7 Base module

A30 WS/FSS control unit

F2 Circuit 58 fuse

Fa Fuse toll system, term. 30

Fb Fuse toll system, term. 15

GPS GPS antenna

GSM GSM antenna

P1 MTCO tachograph

Modification notes

15.7.04

Connection scheme changed.

Install

1

Install support battery in the on-board unit (toll acquisition device) (2)

AN82.88-W-0001-13A

2

Store vehicle and customer data with the service PC in the on-board unit (toll acquisition device) (2)

The procedure on the service PC can be obtained from the documents from the course "Installation of vehicle device" of the Toll Collect company.

3

Open sliding roof

4

Switch off ignition

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

5

Disconnect ground lead from battery

Notes on battery

AH54.10-P-0001-01A

6

Remove footwell trim on driver-side

AR68.30-W-1310A

7

Remove driver-side interior lamp

8

Remove MTCO modular tachograph (P1)

AR54.61-W-0003A

9

Remove covering on tachograph slot

10

Remove bracket for MTCO tachograph (P1)

11

Remove driver-side speaker

12

Remove paneling from A-pillar at driver side

The support rod must be reattached for the duration of the installation process after removing the paneling.

AR68.30-W-4050A

13

Release Instrument (INS) and fold back

AR54.30-W-6027B

14

Open electrical compartment cover

15

Undo and fold back base module (A7).

16

Install multifunction antenna (1)

AN82.88-W-0001-01A

*BA82.88-N-1001-01A

17

Install the extension lines for the multifunction antenna (1)

AN82.88-W-0001-02A

18

Install wiring harness for toll system

AN82.88-W-0001-03A

19

Connect wiring harness for toll system to MTCO modular tachograph (P1)

AN82.88-W-0001-05A

20

Connect wiring harness for toll system in electrical compartment

AN82.88-W-0001-04A

21

Connect and install DSRC communication module (3)

AN82.88-W-0001-08A

*001589882100

22

Prepare console housing for on-board-unit (toll acquisition device) (2) for installation and install

AN82.88-W-0001-09A

23

Adjust turn rate sensor (gyro) of On Board Unit (toll acquisition device) (2)

AN82.88-W-0001-10A

*001589882100

24

Connect and install On Board Unit (toll acquisition device) (2)

AN82.88-W-0001-11A

25

Install remaining parts onto vehicle

26

Synchronize MTCO modular tachograph (P1)

27

Check operation and carry out road test

Antenna toll system

Number

Designation

Models 930 /932 /933 /934 /944 /950 /952 /953 /954 /970 /972 /974 /975 /976

BA82.88-N-1001-01A

Hirschmann multifunction antenna GPS 925/DCS on roof

Nm

7 (1)

Retrofit toll system

Choke angle gauge (electronic)

001 589 88 21 00

Parts ordering notes

Part no.

Designation

Quantity

---

Installation kit for Grundig toll system

1

B6 782 1168

Console for on-board unit

1

Odkazované dokumenty