Platí pro: MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 472726 with CODE (F04) Cab L (long) except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter) except CODE (DD2) Cab with 1550 mm floor-to-ceiling height Mautsystem Fa. Grundig in Fahrzeuge mit Tachograph MTCO oder Tachograph TVI 2400 MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 472726 with CODE (F15) MEGASPACE cab Mautsystem Fa. Grundig in F
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
1 Make cutout (1) in the headliner behind the installation location of the tachograph (3).
2 In order to pull in the extension lines (2) from the opening in the interior lamp, push a suitable aid (e.g. air line Ø 6 mm or wire) to the cutout (1).
3 Secure extension lines (2) to the aid and pull through the opening in the interior lamp to the cutout (1).
W82.88-1000-03
W82.88-1010-01
4 Push foam sleeves (4) over the connection lines of the multi-function antenna.
5 Connect extension lines (2) to the connectors on the connection lines of the multi-function antenna.
6 Push foam sleeves (4) over the connectors.
7 Secure connectors to the interior lamp feed line using tie straps.
W82.88-1036-12
8 Remove plug from the opening (5) on the left-hand side of the stowage compartment (6) above the windshield.
9 Route extension lines inside the stowage compartment (6) above the windshield and through the opening (5) to the installation location of the on-board unit (toll collection unit).
The antenna extension lines must not be shortened. The excess length of the lines must be accommodated inside the stowage compartment (6) above the windshield.
