Fit heat insulation to trim

AN68.30-W-0006-01B

Fit heat insulation to trim

 Danger !

Risk of poisoning caused by inhaling vapors or swallowing adhesive. Risk of injury caused by adhesive coming into contact with skin and eyes

Wear respiratory protection, protective gloves and safety glasses. Pour adhesive into suitable and appropriately marked containers only.

AS00.00-Z-0016-01A

MODEL

940, 942, 943, 944 with BODY 944.890

with CODE DD5 (Cab with high roof)

with CODE F04 (Cab L (long))

1

Glue heat insulation (1, 2, 3) to marked points (A) on front headliner.

 The heat insulation (1, 2, 3) should be seated in the grooves (arrows B). Heat insulation (2) should be centered in the front roof paneling and heat insulation (1, 3) should be flush with the offset (arrows C) of the front headliner.

2

Glue heat insulation (4) to marked points (D) on left center headliner and glue to right center headliner in same manner.

 Align heat insulation (4) at elongation of edge (arrow E) and swaged seam (arrow F).

Shown on left center headliner

3

Glue heat insulation (5, 6, 7) to marked points (A) on rear front center headliner.

 Heat insulation (5, 6, 7) should make contact at edges (arrows H). Heat insulation (6) should be aligned with the center of the rear center headliner.

4

Glue heat insulation (8) to marked points (D) on right center headliner and glue to right center headliner in same manner.

 Heat insulation (8) should be aligned with the swaged seam (arrows K).

Shown on right side wall paneling

5

Glue heat insulation (9, 10, 11, 12) to marked points (A) on rear wall paneling.

 Heat insulation (9, 10, 11, 12) should be aligned with the swaged seam (arrows M).
Lower heat insulation (11) should be aligned additionally with the cutout in the rear wall paneling (arrow N).

6

Glue heat insulation (13, 14, 15, 16, 17) to marked points (A) on rear front headliner.

 Heat insulation (15) should be aligned with the center of the rear headliner.
Heat insulation (13, 14, 15, 16, 17) should be seated in the groove of the rear headliner (arrows T).
Heat insulation (14) should make contact with heat insulation (15) (arrow S). Heat insulation (16) should be make contact with heat insulation (15) in same manner.
Heat insulation (13) should make contact with heat insulation (14) (arrow R). Heat insulation (17) should be make contact with heat insulation (16) in same manner.