PE15.00-P-2000-60EA | Legend of wiring diagram of starter, alternator | ENGINE 111, 112, 113 as of 1.6.99 in MODEL 210 |
Code | Designation | Coordinate |
A1 | Instrument cluster | 7A |
A1p13 | Multifunction display | 7A |
C2 | Electrolytic capacitor (alternator/battery harness noise suppressor) | 6G |
G1 | Battery | 7L |
G2 | Alternator | 2A |
K40/2 | Driver-side fuse and relay module | 20A |
K40/4 | Front passenger-side fuse and relay module | 14L |
K40/4k2 | Starter relay | 12L |
M1 | Starter | 9L |
N10/1 | Signal acquisition and actuation module (SAM) driver side | 17A |
N73 | EIS [EZS] control module | 11A |
S40/3 | Clutch pedal switch | 19L |
U24 | Valid for MT [MG] | 18H |
W1 | Main ground (behind instrument cluster) | 12E |
W10 | Ground (battery) | 7H |
W16/3 | Common ground (left wheelhouse) | 19H |
X4 | Circuit 30 terminal block, left footwell | 6H |
X12/3 | Terminal block (circuit 30) | 2L |
X12/3f1 | Generator prefuse | 2K |
X22 | Engine compartment and engine connector | 5E |
X30/7 | Voltage distributor (CAN) connector | 15A |
X63/6 | CAN bus/15u connector | 16I |
Z3/38 | Circuit 15R unfused connector sleeve | 9E |
Z7/30 | Circuit 30 unfused connector sleeve | 10F |
Z9 | Connector sleeve 1 | 17G |