Propeller shaft center support bearing
Number | Designation | Model 140 | ||
BA41.40-P-1001-01A | Bolt, propeller shaft center support bearing to frame floor assembly | Self-tapping screw | Nm | - |
Bolt with washer | Nm | 25 | ||
Bolt with collar and self-centering tip | Nm | 30 | ||
Bolt with collar and without self-centering tip | Nm | - | ||
Only tighten bolts after fastening the flexible couplings on the transmission and on rear axle
When the rear axle is not loaded, before tightening the hexagon head bolts, push the propeller shaft center support bearing 5 mm forwards (arrows) from the current installation and then tighten the hexagon head bolts.
P41.10-0031-03