ar4110p005013da

Tighten bolts of propeller shaft center support bearing

Type ar · topic 41.10 · version 0107 · 2010-01-20

Applies to: MODEL 140

Where it sits

Function group 2 Chassis › 41 Propeller shaft › 41.10 Propeller shaft — Series 140

EinPAS 17 Drivetrain/axle › 17.40 Propeller shaft › 17.40.30 Drive/all-wheel drive propeller shaft — Series 140

AR41.10-P-0050-13DA

Tighten bolts of propeller shaft center support bearing

Propeller shaft center support bearing

Number

Designation

Model 140

BA41.40-P-1001-01A

Bolt, propeller shaft center support bearing to frame floor assembly

Self-tapping screw

Nm

-

Bolt with washer

Nm

25

Bolt with collar and self-centering tip

Nm

30

Bolt with collar and without self-centering tip

Nm

-

Tighten bolts of propeller shaft center support bearing

Only tighten bolts after fastening the flexible couplings on the transmission and on rear axle

When the rear axle is not loaded, before tightening the hexagon head bolts, push the propeller shaft center support bearing 5 mm forwards (arrows) from the current installation and then tighten the hexagon head bolts.

P41.10-0031-03