Remove/install impact absorber on integral carrier

AR31.35-D-0002TE

Remove/install impact absorber on integral carrier

22.11.2019

Model

910 with engine 780.703

1

Impact absorber

2

Screw

3

Screw

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

 

Remove/install

1

Remove lower engine compartment paneling.

AR61.20-D-1105TS

2

Remove screw/bolts (3).

 Screw, impact absorber to integral carrier holder

*BA31.35-N-1004-02TE

3

Remove impact absorber (1).

 To do this, remove screws (2).

 Screw, impact absorber to body

*BA31.35-N-1005-02TE

4

Install in the reverse order.

 Frame-type integral support

Number

Designation

Model 910 with engine 780.703

BA31.35-N-1004-02TE

Screw, impact absorber to integral carrier holder

Nm

109

 Frame-type integral support

Number

Designation

Model 910 with engine 780.703

BA31.35-N-1005-02TE

Screw, impact absorber to body

Nm

109