Deployment of airbag units when no deployment device is present

AR91.60-D-0611-05A

Deployment of airbag units when no deployment device is present

 Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.Model 901, 902, 903, 904, 905Nicht gültig für die Länder A, CH, D

AS91.00-Z-0001-01D

 Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.Model 415, 447, 636, 639, 900, 906, 909Nicht gültig für die Länder A, CH, D

AS91.00-Z-0001-01A

Topical note

Notes on controlled deployment of airbag, sidebag and emergency tensioning retractor units

AH91.60-P-0611-02P



Ignition cable for firing airbag and seat belt tensioner units

WF58.50-P-9160-02A

Model

415, 447, 636, 639, 900, 901, 902, 903, 904, 905, 906, 909

Not valid for countries A, CH, D

1

Fabricate ignition line with a length of at least 10 m with pressure switch.

2

Connect 2-pin plug connection to squib of airbag unit to be scrapped.

 Maintain safe distance of at least 10 m from airbag unit to be scrapped.

3

Connect ignition line to battery.

4

Press both pushbuttons simultaneously.

 For airbag units with 2 squibs, both squibs must be deployed. To do so, repeat operation steps 2 to 4 after plugging the ignition line into the second squib.