ar8840p1000e

Opening engine hood, moving to upright position and closing

Loại ar · chủ đề 88.40 · phiên bản 0105 · 2007-06-28

Áp dụng cho: MODEL 202

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 3 Body › 88 Detachable body components, exterior flaps › 88.40 Engine hood, front flap — Dòng 202

EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.30 Engine hood — Dòng 202

AR88.40-P-1000E

Opening engine hood, moving to upright position and closing

25.6.07

MODEL 202

Opening engine hood, moving to upright position and closing

P88.40-0004-06

1 Lever

2 Handle

3 Locking lever

Danger!

Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, tailgates or sliding roof.

Keep body parts and limbs well clear of moving parts.

AS00.00-Z-0011-01A

Open

1

Pull handle (1) below instrument on left to unlock engine hood.

The handle (2) jumps out of the radiator paneling; slightly lift engine hood, if necessary.

2

Pull handle (2) out of radiator grille as far as the stop and open engine hood

Windshield wiper arm should not be folded toward front.

Do not lift with handle.

Move to upright position

3

Pull locking lever (3) on left engine hood prop in direction of arrow and slightly push engine hood upward so that locking lever (3) cannot arrest. Repeat procedure on right engine hood proper and position engine hood upright.

Close

4

Pull locking lever (3) on left engine hood prop in direction of arrow, repeat procedure on right engine hood prop and lower engine hood.

5

Close engine hood

Tài liệu được tham chiếu