Remove/install anti-icing switch for passenger compartment air conditioning

Loại ar · chủ đề 83.50 · phiên bản 0105 · 2005-03-16

Áp dụng cho: MODEL 901.67, 902.67, 903.67 with CODE (HH7) Additional air conditioning in rear MODEL WD2, WD3, WD6, WD7 with CODE (HH7) Additional air conditioning in rear MODEL 903.672 with CODE (HK2) Air conditioning in rear with underfloor condenser

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 3 Body › 83 Climate control › 83.50 Rear air-conditioning — Dòng 901 (mẫu 67*) · Dòng 902 (mẫu 67*) · Dòng 903 (mẫu 67*, 672)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.12 Sensor/switch/wiring harness — Dòng 901 (mẫu 67*) · Dòng 902 (mẫu 67*) · Dòng 903 (mẫu 67*, 672)

AR83.50-D-6400NA

Remove/install anti-icing switch for passenger compartment air conditioning

23.2.01

MODEL 901.67, 902.67, 903.67 with CODE (HH7) Additional air conditioning in rear

MODEL WD2, WD3, WD6, WD7 with CODE (HH7) Additional air conditioning in rear

MODEL 903.672 with CODE (HK2) Air conditioning in rear with underfloor condenser

Remove/install anti-icing switch for passenger compartment air conditioning

D83.50-1112-12

1 Rubber grommet

2 Connector

3 Anti-icing switch

4 Bolt

5 Anti-icing switch sensor

6 Air inlet grate

 	Remove/Install
1	Detach air inlet grate (6) from the evaporator paneling
2	Detach plugs (2) from anti-icing switch (3) and remove screws (4)
3	Remove anti-icing switch (3)	 Installation: Do not kink sensor for anti-icing switch (5) and insert it carefully into evaporator. Ensure that the rubber grommet (1) is properly seated.
4	Install in the reverse order