Remove/install anti-icing switch for passenger compartment air conditioning

Type ar · topic 83.50 · version 0105 · 2005-03-16

Applies to: MODEL 901.67, 902.67, 903.67 with CODE (HH7) Additional air conditioning in rear MODEL WD2, WD3, WD6, WD7 with CODE (HH7) Additional air conditioning in rear MODEL 903.672 with CODE (HK2) Air conditioning in rear with underfloor condenser

Where it sits

Function group 3 Body › 83 Climate control › 83.50 Rear air-conditioning — Series 901 (models 67*) · Series 902 (models 67*) · Series 903 (models 67*, 672)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.12 Sensor/switch/wiring harness — Series 901 (models 67*) · Series 902 (models 67*) · Series 903 (models 67*, 672)

AR83.50-D-6400NA

Remove/install anti-icing switch for passenger compartment air conditioning

23.2.01

MODEL 901.67, 902.67, 903.67 with CODE (HH7) Additional air conditioning in rear

MODEL WD2, WD3, WD6, WD7 with CODE (HH7) Additional air conditioning in rear

MODEL 903.672 with CODE (HK2) Air conditioning in rear with underfloor condenser

Remove/install anti-icing switch for passenger compartment air conditioning

D83.50-1112-12

1 Rubber grommet

2 Connector

3 Anti-icing switch

4 Bolt

5 Anti-icing switch sensor

6 Air inlet grate

 	Remove/Install
1	Detach air inlet grate (6) from the evaporator paneling
2	Detach plugs (2) from anti-icing switch (3) and remove screws (4)
3	Remove anti-icing switch (3)	 Installation: Do not kink sensor for anti-icing switch (5) and insert it carefully into evaporator. Ensure that the rubber grommet (1) is properly seated.
4	Install in the reverse order