ar8325d1001d

Disassemble and assemble heater housing

Loại ar · chủ đề 83.25 · phiên bản 0103 · 2003-09-15

Áp dụng cho: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic" MODEL XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 except CODE (HH9) Automatic air conditioning "Tempmatic"

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 3 Body › 83 Climate control › 83.25 Automatic heater — Dòng 901 (mẫu 6**) · Dòng 902 (mẫu 6**) · Dòng 903 (mẫu 6**) · Dòng 904 (mẫu 6**) · Dòng 905 (mẫu 6**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — Dòng 901 (mẫu 6**) · Dòng 902 (mẫu 6**) · Dòng 903 (mẫu 6**) · Dòng 904 (mẫu 6**) · Dòng 905 (mẫu 6**)

AR83.25-D-1001D

Disassemble and assemble heater housing

8.2.01

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic"

MODEL XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 except CODE (HH9) Automatic air conditioning "Tempmatic"

Disassemble and assemble heater housing

D83.25-1108-12

1 Bolt

2 Heater housing cover

3 Gasket

4 Heater housing

5 Wiring harness

6 Bolt

7 Heat exchanger

8 Connector

9 Gasket

10 O-Ring

Disassembling, assembling

1

Remove gaskets (3 and 9)

Installation: Clean sealing surfaces and install new gaskets.

2

Remove heater housing cover (2)

3

Remove heat exchanger (7) from the heater housing (4)

4

Remove wiring harness (5)

5

Unscrew connecting piece (8)

Installation: install new O-rings (10).

6

Assemble in reverse order