ar8325d1001d

Disassemble and assemble heater housing

Type ar · topic 83.25 · version 0103 · 2003-09-15

Applies to: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic" MODEL XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 except CODE (HH9) Automatic air conditioning "Tempmatic"

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

AR83.25-D-1001D

Disassemble and assemble heater housing

8.2.01

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic"

MODEL XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 except CODE (HH9) Automatic air conditioning "Tempmatic"

Disassemble and assemble heater housing

D83.25-1108-12

1 Bolt

2 Heater housing cover

3 Gasket

4 Heater housing

5 Wiring harness

6 Bolt

7 Heat exchanger

8 Connector

9 Gasket

10 O-Ring

Disassembling, assembling

1

Remove gaskets (3 and 9)

Installation: Clean sealing surfaces and install new gaskets.

2

Remove heater housing cover (2)

3

Remove heat exchanger (7) from the heater housing (4)

4

Remove wiring harness (5)

5

Unscrew connecting piece (8)

Installation: install new O-rings (10).

6

Assemble in reverse order