Removing and installing heater housing

Loại ar · chủ đề 83.25 · phiên bản 0101 · 2000-02-04

Áp dụng cho: MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

AR83.25-D-1000A

23.4.96

MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

D83.20-0003-06

1 Heater housing

2 Screw with washer

3 Hose clamp

4 Coolant feed hose

5 Coolant return hose

 	Removing, installing
1	Remove ventilation box		AR83.10-D-0010A
2	IRemove cover for instrument panel and knee bolster		AR68.10-D-3512A
3	Loosen hose clamps (3), pull off coolant feed hose (4) and coolant return hose (5)	 Be aware of escaping coolant
4	Remove tie straps (arrows) on heater housing
5	Remove heater housing (1)
6	Install in the reverse order