ar8325d1000a

Removing and installing heater housing

Type ar · topic 83.25 · version 0101 · 2000-02-04

Applies to: MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 901 (models 0**, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 4**) · Series 904 (models 0**, 3**, 4**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — Series 901 (models 0**, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 4**) · Series 904 (models 0**, 3**, 4**)

AR83.25-D-1000A

Removing and installing heater housing

23.4.96

MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Removing and installing heater housing

D83.20-0003-06

1 Heater housing

2 Screw with washer

3 Hose clamp

4 Coolant feed hose

5 Coolant return hose

Removing, installing

1

Remove ventilation box

AR83.10-D-0010A

2

IRemove cover for instrument panel and knee bolster

AR68.10-D-3512A

3

Loosen hose clamps (3), pull off coolant feed hose (4) and coolant return hose (5)

Be aware of escaping coolant

4

Remove tie straps (arrows) on heater housing

5

Remove heater housing (1)

6

Install in the reverse order

Referenced documents