ar8262d7833a

Removing and installing loudspeaker in instrument panel

Loại ar · chủ đề 82.62 · phiên bản 0105 · 2003-09-15

Áp dụng cho: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6

Không có bằng “vi”; đang hiển thị bằng tiếng Anh.

Vị trí

Nhóm chức năng 3 Body › 82 Electrical system, body › 82.62 Loudspeakers, amplifiers, antennas — Dòng 690 (mẫu 6**) · Dòng 901 (mẫu 6**) · Dòng 902 (mẫu 6**) · Dòng 903 (mẫu 6**) · Dòng 904 (mẫu 6**) · Dòng 905 (mẫu 6**)

EinPAS 31 Communication/information/entertainment › 31.75 Audio playback/audio output › 31.75.16 Speaker — Dòng 690 (mẫu 6**) · Dòng 901 (mẫu 6**) · Dòng 902 (mẫu 6**) · Dòng 903 (mẫu 6**) · Dòng 904 (mẫu 6**) · Dòng 905 (mẫu 6**)

AR82.62-D-7833A

Removing and installing loudspeaker in instrument panel

8.7.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

Removing and installing loudspeaker in instrument panel
Removing and installing loudspeaker in instrument panel

D82.62-1101-01

1 Edge guard

2 Loudspeaker cover

3 Loudspeaker

4 Electrical connections

D82.62-1102-01

Remove/install

1

Pull off edge guard (1) in area of A-pillar

2

Remove panelings of A-pillar

Unclip top paneling and pull out upward

3

Remove loudspeaker covers (2)

Unclip outer covers and pull off in direction of A-pillar

4

Unclip loudspeaker (3)

Installation: Push lug (arrow) of loudspeaker (3) forward under the instrument panel, then clip in place at rear.

5

Separate electrical connections (4)

6

Install in the reverse order