Remove/install wiper linkage

AR82.30-D-7600A

4.5.10

MODEL 901, 902, 903, 904, 905

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

D82.30-0034-06

1 Washer

2 Nut

3 Heater housing

4 Wiper linkage

5 Bolts

6 Nut

7 Wiper arm

 	Remove/install
 Danger!	Risk of injury caused by moving parts that can pinch, crush or, in extreme cases even sever extremities.	Always remove ignition key when working on windshield wiper mechanism.	AS82.30-Z-0001-01A
1	Remove ignition key from ignition lock
2	Detach heater housing (3)	 For removal of wiper linkage (4) To do so, unscrew nuts (2) and remove washers (1).
3	Remove wiper arms (7)		AR82.30-D-6100A
4	Unscrew nuts (6)		*BA82.30-N-1002-01D
5	Unscrew bolts (5)		*BA82.30-N-1003-01D
6	Disconnect electrical connector of LHD windshield wiper motor (M7x1)
7	Pull out wiper linkage (4) below dash support
8	Install in the reverse order
9	Carry out function check

 Windshield wiper

Number	Designation			Model 690.6, 901, 902, 903, 904, 905	Model WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7


BA82.30-N-1002-01D	Nut, wiper system to dash support		Nm	10	10
BA82.30-N-1003-01D	Bolt, implement carrier of windshield wiper to bracket	M6	Nm	10	10