Check and correct power steering fluid level

AP46.00-D-4611F

Check and correct power steering fluid level

26.5.15

Model

909

Shown on oil reservoir with dipstick

1

Cap

Shown on oil reservoir without dipstick

 Danger !

Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid.

Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A



Check

1.1

Remove oil reservoir cap (1)

Only with oil reservoir without separate oil dipstick.

 Check cap seal for damage and replace if necessary.

1.2

Remove oil dipstick

Only with oil reservoir with separate oil dipstick.

2

Check oil level

 In the case of oil reservoirs without an oil dipstick in the cap (1) and without a separate oil dipstick, the oil reservoir is correctly filled when the oil is between the "Min" and "Max" mark (arrow) at approx. 20 °C.

 In the case of oil reservoirs with oil dipstick in the cap (1) and with a separate oil dipstick, the oil reservoir is correctly filled when the oil is between the "Min" and "Max" mark corresponding to the oil temperature.
Clean the oil dipstick with a lint-free rag, insert it completely, pull it out again and read off the oil level.

3

Adjust to correct level



Steering gear oils (ATF) (specification 236.3)

BB00.40-P-0236-03A

4.1

Mount and tighten cap (1)

Only with oil reservoir without separate oil dipstick.

4.2

Insert oil dipstick

Only with oil reservoir with separate oil dipstick.