1 | Pushbutton |
2 | Pushbutton |
3 | Pushbutton |
4 | Pushbutton |
5 | Pushbutton |
6 | Pushbutton |
7 | Multifunction display |
N54.30-8274-11
1 | Move steering lock to drive position | ||
2 | Call up "Adjustments" menu by repeatedly pressing the button (3 or 4). | ||
3 | Position the visual bar on the "Configuration" menu by repeatedly pressing button (1 or 2). | ||
4 | Press button (5 or 6) until the "Enable diagnosis" menu is displayed and open the diagnosis menu by pressing button (1). | ||
5 | Call up the "Diagnosis" menu by pressing button (4). | ||
6 | By pressing the button (1 or 2) select the "Diagnosis" submenu and confirm with button (5). | ||
7 | Press button (1 or 2) to select "FM" control unit from list of control units shown, and confirm with button (5) | ||
8 | By repeatedly pressing the button (1 or 2) select the "Measurement values" menu and confirm with button (5) | ||
9 | Repeatedly pressing the button (1 or 2 ) enables the measurement values (MV) MV 2 to MV 5 to be read out in the multifunction display (7) | Do not actuate the service brake during the read out process. | |
10 | Enter the read out test values on the maintenance sheet. | ||
Axle assignment of brake lining sensors | |||
11 | Secure vehicle against rolling | ||
12 | Release parking brake | ||
13 | Press button (6) repeatedly until the list of control units is shown | ||
14 | By repeatedly pressing the button (1 or 2) select the "HM" control unit and confirm with button (5) | ||
15 | By repeatedly pressing the button (1 or 2) select the "Measurement values" menu and confirm with button (5) | ||
16 | Repeatedly pressing the button (1 or 2 ) enables the measurement values MV 2 to MV 5 to be read out in the multifunction display (7) | Do not engage parking brake and service brake when reading out. | |
17 | Enter the read out test values on the maintenance sheet. | ||
Axle assignment of brake lining sensors | |||
18 | Return to the main menu by pressing key (3 or 4) repeatedly. |