of0010w300016z

Test sheet for fault analysis in the event of vibrations/noises at the vehicle, form

Tür of · konu 00.10 · sürüm 0100 · 2019-08-19

Geçerli olduğu: Model 959

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 0 Toplam › 00 Araç Komple › 00.10 Aracın tamamı, Teknik değerler, Yasal kontroller — Seri 959

EinPAS 45 Veriler/Bilgi › 45.10 Tüm araç › 45.10.20 Tüm araç — Seri 959

OF00.10-W-3000-16Z

Test sheet for fault analysis in the event of vibrations/noises at the vehicle, form

Model

959

For accurate findings a road test should be carried out in the load condition complained of(unladen/laden/partially laden) with the driver and the test sheet should be filled in.

Please set the completely filled-in test sheet on fault analysis for vibrations and noise in the vehicle and the corresponding data sheet for flange/inclination angle measurement in Xentry TIPS as a case module.

Markets without TIPS fax the test sheets to the responsible contact in the MPC.

Test sheet for fault analysis in the event of vibrations/noises at the vehicle, 
	form

W00.00-1096-08

Contact person: ________________________________________________

Telephone/fax: ______________________________________________

Transmission model: ____________________________________________________

Rear axle ratio (i total): _________________________________

Body type: ______________________________________________________

Body manufacturer: _____________________________________________

Tire size/make FA 1: ___________________________

Tire tread FA:

Off-road

☐

Street

☐

Tire size/make RA 1: ___________________________

Tire tread HA:

Off-road

☐

Street

☐

Tire size / make FA 2: ___________________________

Retreaded tire:

Yes

☐

No

☐

Tire size / make RA 2: ___________________________

Tire condition:

OK

☐

Not OK

☐

Comments for not OK: _______________________________________________________________________________________________________

Tire tread depth:

FA 1___________mm

FA 2___________mm

RA 1___________mm

RA 2___________mm

Tire pressure:

FA 1___________bar

FA 2___________bar

RA 1___________bar

RA 2___________bar

Rolling circumference (all-wheel drive):

FA 1___________mm

FA 2___________mm

RA 1___________mm

RA 2___________mm

General condition of vehicle:

1 ☐

2 ☐

3 ☐

4 ☐

5 ☐

The problem occurred for the first time at a driven distance of: _______________________________km

1

Is the body or auxiliary frame attached as per the body/equipment mounting directives ?

Yes

☐

No

☐

2

Have changes been carried out by the body manufacturer ?

Yes

☐

No

☐

Which changes: _______________________________________________________________________________

__________________________________________________________________________________________________

3

Have wheelbase changes been performed on the vehicle ?

Yes

☐

No

☐

Wheelbase _________mm

4

How is the complaint defined by the customer ?

Vibrations in the cab

- At intervals

Yes

☐

No

☐

- Constant

Yes

☐

No

☐

- Cab transverse vibrations

Yes

☐

No

☐

- Cab longitudinal vibrations

Yes

☐

No

☐

- Chassis vibrations

Yes

☐

No

☐

Humming

- At intervals

Yes

☐

No

☐

- Constant

Yes

☐

No

☐

Knocking

Yes

☐

No

☐

Howling

- Constant

Yes

☐

No

☐

The problem occurs:

In the engine braking mode ☐

In deceleration ☐

With no load ☐

In traction ☐

5

Are vibrations noticeable when stationary with increasing engine speed?

Yes

☐

No

☐

from ________________ rpm to ________________ rpm

6

Is the complaint dependent on engine speed while driving ?

Yes

☐

No

☐

The problem occurs at engine speeds:
(as accurate as possible speed details, e.g. from 1230 rpm to 1350 rpm)

from ____________ rpm to ____________ rpm in __________ gear

from ____________ rpm to ____________ rpm in __________ gear

from ____________ rpm to ____________ rpm in __________ gear

Does the vibration change depending on rpm during gear change ?

Yes

☐

No

☐

7

Is the problem speed-dependent?

Yes

☐

No

☐

The problem occurs at speeds:

from ____________ km/h to ____________ km/h in __________ gear

from ____________ km/h to ____________ km/h in __________ gear

from ____________ km/h to ____________ km/h in __________ gear

The problem occurs at:

Part throttle operation ☐

Wide open throttle ☐