G68.30-3111-01
1 Trim
2 Door seal
G68.30-3113-02
3 Screw
4 Trim
5 Seat belt
6 Trim
7 Screw
8 Cover
Modification notes
4.4.08 | Value modified: Bolt, lower belt anchor to B-pillar | ||
Value modified: Bolt, belt anchor to belt height adjuster slider |
| Remove/install | ||
1 | Remove paneling (1) | ||
2 | Remove door seal (2) in area of paneling (6) | ||
3 | Remove screw (7) | | |
4 | Remove cover (8) (arrow A) | ||
5 | Remove screw (3) | | |
6 | Remove paneling (4) in front of speaker | ||
7 | Pull paneling (6) away from B-pillar (arrows B) | ||
8 | Remove seat belt (5) from paneling (6) | Installation: Observe installation position of seat belt (5), otherwise the seat belt (5) can malfunction or fail. | |
9 | Remove paneling (6) | Installation: Check safety clamps on paneling (6), replace if necessary. | |
10 | Install in the reverse order | ||
11 | Check seat belt (5) for proper function |
Seat belts/emergency tensioning retractors