ar6830g4700e

Remove/install paneling on B-pillar

Type ar · topic 68.30 · version 0200 · 2008-04-04

Applies to: MODEL 405.050 with BODY 979.820

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 405 (models 050) · Series 979 (models 820)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 405 (models 050) · Series 979 (models 820)

AR68.30-G-4700E

Remove/install paneling on B-pillar

4.4.08

MODEL 405.050 with BODY 979.820

Remove/install paneling on B-pillar

G68.30-3111-01

1 Trim

2 Door seal

Remove/install paneling on B-pillar

G68.30-3113-02

3 Screw

4 Trim

5 Seat belt

6 Trim

7 Screw

8 Cover

Modification notes

4.4.08	Value modified: Bolt, lower belt anchor to B-pillar		*BA91.40-N-1002-01C
	Value modified: Bolt, belt anchor to belt height adjuster slider		*BA91.40-N-1004-01C

 	Remove/install
1	Remove paneling (1)
2	Remove door seal (2) in area of paneling (6)
3	Remove screw (7)		*BA91.40-N-1002-01C
4	Remove cover (8) (arrow A)
5	Remove screw (3)		*BA91.40-N-1004-01C
6	Remove paneling (4) in front of speaker
7	Pull paneling (6) away from B-pillar (arrows B)
8	Remove seat belt (5) from paneling (6)	 Installation: Observe installation position of seat belt (5), otherwise the seat belt (5) can malfunction or fail.
9	Remove paneling (6)	 Installation: Check safety clamps on paneling (6), replace if necessary.
10	Install in the reverse order
11	Check seat belt (5) for proper function

 Seat belts/emergency tensioning retractors

Number	Designation			Body 979.820 in model 405.05


BA91.40-N-1002-01C	Bolt, lower belt anchor to B-pillar		Nm	40
BA91.40-N-1004-01C	Bolt, belt anchor to belt height adjuster slider		Nm	40