AR46.30-D-0010B | Fill power steering pump and bleed | 19.2.01 |
MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada
MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA
MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico
N46.00-2180-01
| Filling, bleeding | ||
1 | Remove cap from oil reservoir | Inspect seal of cap, replace if necessary. | |
2 | Fill steering oil reservoir with oil | Do not fill oil to beyond max. mark. | |
| |||
3 | Crank steering from right to left when engine is at a standstill and correct permanent oil level in reservoir | Perform operation until bubble formation can no longer be seen in the steering oil reservoir. | |
4 | Crank steering with engine at idle speed and correct oil level in reservoir | Perform operation until bubble formation can no longer be seen in the steering | |
5 | Mount cap and tighten- | ||
6 | Checking steering system for leaks | |
Steering