ar4210b0130ta

Check bellows on thrust pieces

Tür ar · konu 42.10 · sürüm 0205 · 2017-10-27

Geçerli olduğu: Model 934.241/251 with code BB5 (Disc brakes on front and rear axle) Model 958.2/4 with code BB5 (Disc brakes on front and rear axle)

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 2 Şasi › 42 Frenler Hidrolik ve mekanik › 42.10 Ayak freni — Seri 934 (modeller 241, 251) · Seri 958 (modeller 2**, 4**)

EinPAS 21 Frenler/Vakum tertibatı/Basınçlı hava tertibatı › 21.15 İşletim freni/Vakum tertibatı › 21.15.40 Ön işletme freni — Seri 934 (modeller 241, 251) · Seri 958 (modeller 2**, 4**)

EinPAS 21 Frenler/Vakum tertibatı/Basınçlı hava tertibatı › 21.15 İşletim freni/Vakum tertibatı › 21.15.42 Arka işletme freni — Seri 934 (modeller 241, 251) · Seri 958 (modeller 2**, 4**)

AR42.10-B-0130TA

Check bellows on thrust pieces

19.10.2017

Model

934.241/251

with code BB5 (Disc brakes on front and rear axle)

Model

958.2/4

with code BB5 (Disc brakes on front and rear axle)

Check bellows on thrust pieces

1

Pressure piece

2

Fanfold bellows

W42.10-0010-01

Remove

Danger

Risk of death caused by vehicle slipping or toppling off during lifting

Only lift vehicle at the lift support points specified by the vehicle manufacturer.

AS00.00-Z-0032-01A

Notes on repairing brake caliper

AH42.10-N-9406-05A

1

Remove the wheel


.

AR40.10-B-1100D

2

Remove the brake pads

AR42.10-B-0170TA

Check

3

Check the fanfold bellows (2) and the pressure parts (1)

In the case of malfunctioning of the pressure parts (1) and/or damages in the fanfold bellows (2):

Replace the pressure parts (1) with the fanfold bellows (2).

Remove/install thrust pieces with boots when brake caliper is installed

AR42.10-B-0200TA

Install

4

Install a new brake pad at the outer span of the brake carrier


The pad limits the adjustment travel of the pressure pieces (1) preventing the total output of threaded pipes.
This would result in the replacement of the brake caliper.

5

Adjust the regulator clockwise until the two fanfold bellows (2) of the pressure parts (1) are well visible

To adjust, use only a ring spanner or a socket.

6

Install on the reverse order

Atıfta bulunulan belgeler