1 | Diagonal arm |
2 | Rear axle mounting bracket screw |
3 | Vehicle frame holder screw |
B35.15-0002-12
| Remove/install | ||
Danger | Risk of death from lowering vehicle when working between wheels and body. Risk of injury from pinching or crushing when working on the air suspension. | Testing and repair work between the wheel and wheel arch or in the wheel well should only be performed if the vehicle is secured using suitable support fixtures to prevent it from lowering. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
1 | Loosen the diagonal arm fastening screws (1) from the mounting bracket (2) on the rear axle | ||
Topical note | Notes on self-locking nuts and bolts | ||
.Triangle tension bar (separated) on the rack over the rear axle | |||
2 | Loosen the diagonal arm screws (1) from the vehicle frame (3) on both sides and remove it | If necessary, replace the diagonal arm expansive bushing. | |
.Triangular tension bar (separated) on the chassis cross member bearing | |||
3 | Install in reverse order |
Atıfta bulunulan belgeler
- ah0000n000101a Kendinden emniyetli cıvata ve somunlar ile ilgili hatırlatmalar
- as0000z000501a Çalışan motorda, aracın kendiliğinden hareket etmesi nedeniyle kaza tehlikesi. Motor çalışırken veya motoru çalıştırırken yapılan müdahalelerde ezilmeler ve yanmalar nedeniyle yaralanma tehlikesi
- as3222z000101a Tekerlek ve üst yapı arasındaki çalışmalarda aracın indirilmesi nedeniyle hayatitehlike. Havalı süspansiyon sistemindeki çalışmalarda sıkışma veya ezilme nedeniyle yaralanma tehlikesi.