Prepare shift fork for installation

Tür ar · konu 28.50 · sürüm 0104 · 2009-10-20

Geçerli olduğu: MODEL 903.0 /4, 904.0 /4 with CODE (ZG1) Engageable all-wheel drive MODEL 903.0 /4, 904.0 /4 with CODE (ZG2) Permanent all-wheel drive MODEL 903.0 /4, 904.0 /4 with CODE (ZG3) Engageable all-wheel drive with gear reduction

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 2 Şasi › 28 Dağıtıcı şanzıman › 28.50 Dişli düzeni, Miller — Seri 903 (modeller 0**, 4**) · Seri 904 (modeller 0**, 4**)

EinPAS 17 Tahrik aksamı/Aks › 17.22 Dağıtıcı şanzıman › 17.22.38 Kumanda/kumanda silindiri/kumanda pistonu — Seri 903 (modeller 0**, 4**) · Seri 904 (modeller 0**, 4**)

AR28.50-D-1002-02A

Prepare shift fork for installation

Models 903.0/4, 904.0/4 with code ZG1

Models 903.0/4, 904.0/4 with code ZG2

Models 903.0/4, 904.0/4 with code ZG3

Repair materials

Number	Designation	Order number
BR00.45-Z-1026-01A	Terostat 33 sealant	A 001 989 61 20
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51 11

D28.10-0021-01

1 Clean oil and grease off shift fork (1) on inner edges (arrows) and seal with sealing compound.

2 Install new seal boots (2).

 Observe installation position:
The open side of the seal boots must point towards the shift fork in each case.

3 Coat seal boots (2) with lubricant.