AR28.10-D-1002-02A | Install bushings in the housing | Model 903.0/4, 904.0/4 with code ZG1 as of transfer case End no.: 000820 Models 903.0/4, 904.0/4 with code ZG2 Models 903.0/4, 904.0/4 with code ZG3 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1026-01A | Terostat 33 sealant | A 001 989 61 20 |
D28.10-0017-01
1 Drive bushings (1) into the front and rear section of the housing.
Install bushings (1) with the outer chamfers (arrow) in front in the housing.
To drive in the bushings use a hard wooden block with the following dimensions:
Height: approx. 60 mm
Depth: approx 50 mm
Width: approx. 50 mm
2 Seal bushings to housing with sealing compound.
The area must be free of oil and grease.
D28.10-0018-01