ar0716l1090va

Remove/install common rail diesel injection (CDI) coolant temperature sensor

Tür ar · konu 07.16 · sürüm 0100 · 2003-03-13

Geçerli olduğu: ENGINE 668.914 in MODEL 414.700

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 1 Motor › 07 Karışım hazırlama › 07.16 Common-Rail dizel püskürtme sistemi — Seri 414 (modeller 700) · Seri 668 (modeller 914)

EinPAS 15 Motor › 15.25 Motor soğutma sistemi › 15.25.12 Sensör/Şalter/Kablo demeti — Seri 414 (modeller 700) · Seri 668 (modeller 914)

AR07.16-L-1090VA

Remove/install common rail diesel injection (CDI) coolant temperature sensor

26.7.01

ENGINE 668.914 in MODEL 414.700

Remove/install common rail diesel injection (CDI) coolant temperature sensor

L07.16-0021-11

1 ECT sensor connector

2 Retaining clamp

3 Sealing ring

B11/4 Coolant temperature sensor

Remove/install

1

Separate plug connection of coolant temperature sensor (1)

Danger!

Risk of injury to skin and eyes from scalding with hot coolant which splashes out. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles.

Wear protective gloves, protective clothing and eye protection.

AS20.00-Z-0001-01A

2

Drain coolant

At crankcase.

AR20.00-L-1142VA

3

Use a screwdriver to press out retaining clamp (2)

4

Remove coolant temperature sensor (B11/4)

Installation:Replace seal (3).

5

Install in the reverse order

6

Inspect cooling system for leaks

AR20.00-L-1010VA

Atıfta bulunulan belgeler