Major assemblies - check tightness and condition

AP00.20-B-0050TA

Major assemblies - check tightness and condition

05.07.2016

Model

934.241/251, 938.14 with engine 457.9, 460.984

Model

936.315 with engine 541.976

Model

958 with engine 457.9

Model

958 with engine 904.9, 906.9, 924.9, 926.9



Check

1

Visually check for leakage points on the engine, gearbox, auxiliary power outlet, retarder, transfer case, front axle, rear axle, trailing axles and hauling with additional steering, steering, steering hydraulic pump and cabin tilting system

 Slightly moist leakage points are not to worry.

 Before carrying out a repair, check if the leakage cause is not occurring due to oil overfilling or clogged vent. If in doubt, clean the leakage area and check for correct oil level. With a test drive check if the leakage persists.

In major leakage with constant loss of oil.



Eliminate leakage points with separate invoicing.