Axle sleeve |
B33.25-0047-01
Steering knuckles |
B33.25-0028-01
B41.10-0039-01
B41.10-0035-01
B41.10-0038-01
Rear axle universal joint |
Intermediate bearing universal joint |
Transmission universal joint |
B41.10-0034-01
B41.10-0036-01
B41.10-0037-01
Model 979.013; 979.016 |
Rear axle universal joint |
Intermediate bearing universal joint |
Transmission universal joint |
1 | Clean grease fittings using cloth | For lubrication using grease fittings, use only high pressure lubrication pumps which do not exceed 10 to 15 bar. | |
2 | Lubricate the points indicated by the greasers | A lubrication point is considered well lubricated when new grease is shown at its contour. | |
To ensure a good steering knuckle lubrication it is recommended to lift vehicle by the front axle. | |||
If required, turn transmission shaft so the lubrication pump can correctly adapt to grease fittings. | |||
Transmission shaft: lubricate all universal joints, sliding sleeve and intermediate bearing. | |||
3 | Clean exceeding grease |