SM26.20-W-0004A | Replace gear control (GS) control unit and splitter group solenoid valve seat on gate module | 4.2.09 |
TRANSMISSION 715.5 in MODEL 930, 932, 933, 934 with CODE (GS7) Gear control II
as of vehicle identification end no. K 810221 to L 036899
W26.19-1077-09
1 Housing
2 Gasket
3 Valve seat
4 Sealing ring
5 Intermediate plate
6 Gasket
7 Valve seats
8 Sealing ring
9 Sealing ring
A16 Gear control (GS II) control unit
Y29 Splitter solenoid valve 1 (MS1)
Y30 Splitter solenoid valve 2 (MS2)
Y33 Gate solenoid valve 1 (MG1)
Y34 Gate solenoid valve 2 (MG2)
10 Adhesive label
11 Model plate
A Screw
B Screw
C Screw
D Screw
E Screw
F Screw
Modification notes
Operation no. of operation texts or standard texts and flat rates
Category | Op. no. | Operation text | Time | Acc. no. | Code |
N | 025479 | OPERATIONS: REPLACE GEAR CONTROL (GS) CONTROL UNIT AND SOLENOID VALVE SEAT FOR SPLITTER GROUP ON GATE MODULE | 033 WU/2.75 h | --- | --- |
| Checking | ||
1 | Check whether an adhesive label (10) is attached to gear control (GS) control unit (A16) | Gear control (GS) control units (A16) with adhesive label 14.0 are OK. The valve seats (3) must not be changed under any circumstances. | |
Gear control (GS) control units (A16) without adhesive label: Proceed with step 2. | |||
2 | Read off DaimlerChrysler part number on model plate (11) of gear control (GS) control unit (A16) | Gear control (GS) control units (A16) with DaimlerChrysler part numbers: 002 260 22 63 002 260 23 63 002 260 47 63 002 260 48 63 002 260 52 63 002 260 53 63 002 260 54 63 The valve seats (3) must not be changed under any circumstances. | |
Replace gear control (GS) control unit on gate module. | |||
Vehicles without code (N56) Power take-off transmission-independent (NMV) i = 1.48 or code (N57) Power take-off transmission-independent (NMV) i = 1.09: Gear control (GS) control units (A16) with DaimlerChrysler part numbers: 001 260 66 63 001 260 83 63 001 260 94 63 001 260 95 63 002 260 07 63 002 260 08 63 002 260 09 63 the valve seats (3) on the gate module and the Gear control (GS) control unit (A16) must be replaced. | |||
Replace gear control (GS) control unit and splitter group solenoid valve seat on gate module. | |||
Vehicles with code (N56) Power take-off transmission-independent (NMV) i = 1.48 or code (N57) Power take-off transmission-independent (NMV) i = 1.09: Gear control (GS) control units (A16) with DaimlerChrysler part numbers: 001 260 95 63 002 260 09 63 replace the gear control (GS) control unit (A16). | |||
Replace gear control (GS) control unit on gate module. | |||
Vehicles without code (N56) Power take-off transmission-independent (NMV) i = 1.48 or code (N57) Power take-off transmission-independent (NMV) i = 1.09: On gear control (GS) control units (A16) without model plate (11), check hole in housing of gate module. | |||
Check hole in housing of gate module. | |||
Vehicles with code (N56) Power take-off transmission-independent (NMV) i = 1.48 or code (N57) Power take-off transmission-independent (NMV) i = 1.09: On gear control (GS) control units (A16) without model plate (11), replace gear control (GS) control unit (A16). | |||
Replace gear control (GS) control unit on gate module. | |||
3 | Mark gate module with a blue dot (arrow) on housing (1) | Remove or paint over the yellow dot, if present. Scrap all removed parts. | |
4 | Perform long initialization sequence | Vehicles with code (GE2) Electronic drive control II and with code (GS7) Gear control II | |
Vehicles with code (GS7) Gear control II |
Parts ordering notes
Part no. | Designation | Quantity |
A 002 260 59 63 | Control unit repair kit | As required |