SM00.00-D-0011AK | Carry out service measures with code KOLBENBREM | 29.2.12 |
MODEL 906.### #N as of 304413 up to 317754,
906.### #S as of 105687 up to 125582
Modification notes
Operation no. of operation texts or standard texts and flat rates
Category | Op. no. | Operation text | Acc. no. | Code |
O | 026897 | Install CDI control unit software | 00901 56 | KOLBENBREM |
O | 026898 | Replace parking brake brake adjuster | 00901 56 | KOLBENBREM |
D42.20-1141-11
1 Return spring
2 Brake shoes
D42.20-1142-11
3 Adjuster
4 Adjustment screw
| List of affected vehicles | Model 906 from | |
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
| Notes on repairs to brake system | All models | |
1 | Remove rear wheels | ||
2 | Remove brake carrier | Removal: Press back brake pads. | |
Remove brake carrier with brake caliper and tie up so that the brake hose is not tensioned. | |||
3 | Remove wheel flange | To counterhold, place an assembly bar between two wheel studs. | |
4 | Remove rear axle brake disk | Removal: Loosen adjustment screw (4) of brake adjuster (3). | |
5 | Remove return spring (1) | | |
6 | Spread brake shoes (2) at the top | Removal: Fix brake shoes (2) in position on anchor plate. | |
7 | Remove brake adjuster (3) | Removal: Remove adjustment screw (4) completely. | |
8 | Install in the reverse order | ||
9 | Adjust basic clearance for parking brake | ||
10 | Build up brake pressure | Operate brake pedal several times. | |
11 | Connect DAS | DAS version Use 11/2008 with add-on 2008-12-12-1059, 01/2009 with add-on 2008-12-12-1060, 02/2009 with add-on 2009-03-05-1106, 03/2009 with add-on 2009-03-05-1107. DAS version 04/2009 includes die flashware in the regular release. | |
It is absolutely essential to closely follow the steps as per DAS. | |||
12 | Connect battery charger | Using battery charger ensure an adequate power supply (min. 12.5 V) of on-board electrical system battery. | |
13 | Install software for CDI control unit | ||
14 | Disconnect DAS |
Parking brake
Number | Designation | Model 906 | ||
BA42.20-N-1015-01A | Adjustment screw, basic clearance of parking brake | Nm | 10 | |
BA42.20-N-1016-01A | Friction torque, adjustment screw of adjuster, basic clearance of parking brake | Nm | 5 | |
Rear axle brake caliper
Number | Designation | Model | |||
BA42.10-N-1001-12A | Bolt, brake caliper support to rear axle tube | M121.5 | Nm | - | |
M141.5 | Stage 1 | Nm | 80 | ||
Stage 2 | ° | 30 | |||
M161.5 | Stage 1 | Nm | 80 | ||
Stage 2 | ° | 40 | |||
Rear axle brake disks
Number | Designation | Model | |||
BA42.10-N-1002-13A | Collar bolt securing wheel flange ring with brake disk to rear wheel hub | M141.5 | Stage 1 | Nm | 80 |
Stage 2 | ° | 40 | |||
Removal and installation tool
116 589 01 62 00
Parts ordering notes
Part no. | Designation | Quantity |
A 000 423 09 19 05 | Repair kit | 1 |