si6010p0008c

Service Information: Supplementary package for body straightening system

ประเภท si · หัวข้อ 60.10 · เวอร์ชัน 0100 · 2019-03-11

ใช้กับ: Model 463 with engine 176 with code XZ5 (Model year 2016) with code ZU7 (National version for Canada) Model 463 with engine 176 with code XZ5 (Model year 2016) with code ZU8 (National version for USA) Model 463 with engine 642 with code XZ5 (Model year 2016) with code ZU7 (National version for Canada) Model 463 with engine 642 with code XZ5 (Model year 2016) with code ZU8 (National version for USA)

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 3 Body › 60 Body - general › 60.10 Straightening bench, straightening accessory — ซีรีส์ 176 · ซีรีส์ 463

EinPAS 35 Body/frame/detachable parts › 35.15 Measurements/straightening bench › 35.15.20 Chassis measurement/frame measurement — ซีรีส์ 176 · ซีรีส์ 463

EinPAS 35 Body/frame/detachable parts › 35.15 Measurements/straightening bench › 35.15.30 Straightening bench — ซีรีส์ 176 · ซีรีส์ 463

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — ซีรีส์ 176 · ซีรีส์ 463

ใช้กับเครื่องยนต์/เกียร์ด้วย: 642 ***

SI60.10-P-0008C

Service Information: Supplementary package for body straightening system

05.03.2019

Model

463 with engine 176

with code XZ5 (Model year 2016)

with code ZU7 (National version for Canada)

Model

463 with engine 176

with code XZ5 (Model year 2016)

with code ZU8 (National version for USA)

Model

463 with engine 642

with code XZ5 (Model year 2016)

with code ZU7 (National version for Canada)

Model

463 with engine 642

with code XZ5 (Model year 2016)

with code ZU8 (National version for USA)

Service Information: Supplementary package for body straightening system

1

Steering bracket

2

Body mount brackets

P60.10-A000-11

We would hereby like to notify you that, for the above-mentioned models, the steering brackets (1) and body mount brackets (2) are located in a new position which is different to the other models.

The height difference of the body mount brackets (2) is 17 mm.
The construction of the steering brackets (1) and the front body mount brackets (2) are changed and are designed in mirror reverse for left-hand drive ladder-type frames and right-hand drive ladder-type frames.

During damage diagnosis and when setting down on the straightening systems from CELETTE, CAR BENCH and CAR­O­LINER, the following points must therefore be observed when checking and fixing in place:

CAR BENCH and CAR­O­LINER

Unlike the current data sheet, the height difference of 17 mm must be taken into account directly when adjusting the vehicle on the universal system, depending on the application.

CELETTE

The specific supplementary scope 306.305 is available immediately in combination with the known basic scope for diagnosing damage and repairing the ladder-type frame on the body straightening system.

The straightener parts listed in the table are also required for fixing the steering brackets in place.

Service Information: Supplementary package for body straightening system
Service Information: Supplementary package for body straightening system
Service Information: Supplementary package for body straightening system

P60.10-A001-01

P60.10-A002-01

P60.10-A003-01

Workshop equipment

Basic straightening set
306.320

Supplementary straightening set
306.340

New supplementary straightening set
306.305

Valid for

Model 463 (up to model year 1997)

Model 463 (as of model year 1997 - 2015)

Model 463 (as of model year 2016 - 2018)

Straightener part

306.703 (3)

306.754 (4)

306.757 (5)