Model | 930.### 1# , 932.### 1# , 934.### 1# with front axle 730.114 |
with code R27 (Tapered rims, 10.00-20, for 14.00-20) | |
with code R28 (Tapered rims, 8.50-24, for 12.00-24) | |
with code R47 (Trilex rims, 8.50-24, for 12.00 R 24) | |
with code R48 (Trilex rims, 10.00-20, for 14.00 R 20) | |
with code R82 (Tapered rims, 10.00-20, single tyres) | |
with code RC0 (Wide base rims 10.00 W-20, with hose) | |
with code RC3 (Wide-base rims, 10.00W-20, tube, single tyres) | |
with code RC9 (Rims 10.00 W-20, for single tires) | |
except code ZC2 (HEMA HD900 steering) |
For the above-mentioned vehicles, with immediate effect only steering gears manufactured by HEMA are available as replacement parts.
For vehicles not affected by this Service Information (see document applicability), the situation remains the same: only MB steering gears may be ordered. In this case, the part numbers in the EPC must be used.
Removal and installation of the HEMA steering gear is comparable to the procedure for the previous MB steering gear. Only the position of the oil line connections has changed because of the design.
If an MB steering gear is replaced by the HEMA steering gear, then the parts (A) shown in the picture have to be ordered and changed. The part numbers are available in the "Parts ordering note" table.
After a successful repair, the previous variant parts list (SAA) has to be deleted from the vehicle data card in VeDoc, and the new SAA entered, see "Overview of previous/new SAA" table.
W46.20-1127-73
Parts ordering note |
Part no. | Designation | Quantity |
A 001 995 80 02 | Pipe clamp | 1 |
A 006 997 24 71 | Elbow fitting | 1 |
A 008 997 61 52 | High-pressure hose | 1 |
A 932 460 15 35 | Bracket | 1 |
A 942 466 09 81 | Shaped hose | 1 |
N 000000 001147 | Screw | 1 |
A 932 460 46 24 | Oil line | 1 |
A 941 995 03 01 | Pipe clamp | 1 |
A 942 997 01 72 | Fitting | 1 |
N 000000 000665 | Clip | 1 |
N 910105 008008 | Screw | 1 |
Overview of previous/new SAA |
Model | Previous steering gear | Previous SAA | becomes | New steering gear | New SAA |
930.083 | A 940 460 35 00 | Z 504.550/62 | > | A 375 460 13 00 | Z 533.546/84 |
930.182 | A 940 460 35 00 | Z 504.550/62 | > | A 375 460 13 00 | Z 533.546/84 |
930.183 | A 940 460 35 00 | Z 504.550/62 | > | A 375 460 13 00 | Z 533.546/84 |
932.072 | A 940 460 35 00 | Z 504.550/62 | > | A 375 460 13 00 | Z 533.546/84 |
932.073 | A 940 460 35 00 | Z 504.550/62 | > | A 375 460 13 00 | Z 533.546/84 |
932.083 | A 940 460 35 00 | Z 504.550/62 | > | A 375 460 13 00 | Z 533.546/84 |
932.182 | A 940 460 35 00 | Z 504.550/62 | > | A 375 460 13 00 | Z 533.546/84 |
932.183 | A 940 460 35 00 | Z 504.550/62 | > | A 375 460 13 00 | Z 533.546/84 |
934.082 | A 940 460 35 00 | Z 504.550/62 | > | A 375 460 13 00 | Z 533.546/84 |
934.182 | A 940 460 35 00 | Z 504.550/62 | > | A 375 460 13 00 | Z 533.546/84 |