Tripping alarm with panic switch, function

GF80.50-P-3014B

14.1.97

MODEL 202 as of 1.6.97,
208, 210.081 /281,
210 (except 210.081 /281) as of 1.3.97
with CODE (491) USA version
with CODE (551a) Anti-theft alarm (ATA)

The panic alarm function can be triggered with the remote control key. When the panic button on the remote control key is pressed it sends a radio frequency signal. The signal is received by the vehicle and after checking relayed to the pneumatic system equipment (PSE) control module (combined, A37). The anti-theft alarm then triggers an optical and acoustic alarm.

The alarm can be terminated by pressing the panic button again or by inserting the remote control key into the key opening on the electronic ignition switch (EIS) control module (N73).



As of June 98 the maximum duration for the panic alarm is 3 min.

	Acoustic alarm, function	up to 5/98	GF80.50-P-4005A
		as of 6/98	GF80.50-P-4005C
	Optical alarm, function	up to 5/98	GF80.50-P-4006A
		as of 6/98	GF80.50-P-4006C
	Remote control key, purpose/design/ function		GF80.57-P-4101A
	Transmitting remote control signal, function		GF80.20-P-4010A
	Receiving remote control signal Funkti, functionn		GF80.20-P-4011A
	Pneumatic system equipment (PSE) control module (combined) (A37), location/purpose/design/function		GF80.20-P-4106A
	Electronic ignition switch (EIS) control module, location/purpose/design/function		GF80.57-P-4102A

เอกสารที่อ้างถึง