Close tilting/sliding roof function

GF77.20-P-2002A

23.1.97

MODELS 202 as of 1.6.97,
208, 210.081 /281 (except 208.4),
210 (except 210.081 /281) as of 1.3.97

Function prerequisites

 no overvoltage/undervoltage

Function

The close tilting/sliding roof function is only available in the normalized state of the tilting/sliding roof. It is triggered by pulling the tilting/sliding roof switch (N70s1) downward.

The overhead control panel control module (N70) then actuates the

-----------------------------------------------------------------------------------------

motor of the tilting/sliding roof (M12/1). The direction in which the motor is actuated depends on whether the sliding roof or the tilting roof is open. The motor is actuated until the overhead control panel control module (N70) through the position measurement detects that the tilting/sliding roof is closed, or lock-up of the tilting/sliding roof is detected.

-----------------------------------------------------------------------------------------

	Opening pop-up roof, function	GF77.20-P-2003A
	Open sliding roof function	GF77.20-P-2004A
	Sliding/pop-up roof lock-up recognition, function	GF77.20-P-3000A
	Tilting/sliding roof (SR) position measurement, function	GF77.20-P-3001A
	Tilting/sliding roof (SR) normalization, function	GF77.20-P-3002A
	Tilting/sliding roof motor	GF77.20-P-4100A
	Overhead control panel control module	GF82.20-P-4101A

เอกสารที่อ้างถึง