GF77.20-P-2002A | Close tilting/sliding roof function | 23.1.97 |
MODELS 202 as of 1.6.97,
208, 210.081 /281 (except 208.4),
210 (except 210.081 /281) as of 1.3.97
Function prerequisites
no overvoltage/undervoltage
Function
The close tilting/sliding roof function is only available in the normalized state of the tilting/sliding roof. It is triggered by pulling the tilting/sliding roof switch (N70s1) downward.
The overhead control panel control module (N70) then actuates the
-----------------------------------------------------------------------------------------
motor of the tilting/sliding roof (M12/1). The direction in which the motor is actuated depends on whether the sliding roof or the tilting roof is open. The motor is actuated until the overhead control panel control module (N70) through the position measurement detects that the tilting/sliding roof is closed, or lock-up of the tilting/sliding roof is detected.
-----------------------------------------------------------------------------------------
Referenced documents
- gf7720p2003a Opening pop-up roof, function
- gf7720p2004a Open sliding roof function
- gf7720p3000a Sliding/pop-up roof lock-up recognition, function
- gf7720p3001a Sliding/pop-up roof position measurement, function
- gf7720p3002a Sliding/pop-up roof synchronization, function
- gf7720p4100a Tilting/sliding roof location/task/design/function
- gf8220p4101a Overhead control panel control module, location/purpose/design/function