ENGINE | 900.91/92, 902.912/92/93, 904.92/95, 906.935/936/95/967, 924.91/92/93, 926.96 |
Check values of crankshaft |
Number | Designation | ENGINE 900.91/92, 904.92/95, 924.91/92/93 | ENGINE 902.92/93, 906.935/95, 926.96 | ||
BE03.20-N-1001-02L | Main bearing journal diameter | Default | mm | 85,990...86,010 | 85,990...86,010 |
Deviation –0.1 | mm | 85,890...85,910 | 85,890...85,910 | ||
Deviation –0.25 | mm | 85,740...85,760 | 85,740...85,760 | ||
Deviation –0.5 | mm | 85,490...85,510 | 85,490...85,510 | ||
Deviation –0.75 | mm | 85,240...85,260 | 85,240...85,260 | ||
Deviation –1.0 | mm | 84,990...85,010 | 84,990...85,010 | ||
BE03.20-N-1002-02L | Fitted bearing journal width | Default | mm | 31,000...31,062 | 31,000...31,062 |
Deviation –0.3 | mm | 31,300...31,362 | 31,300...31,362 | ||
Deviation –0.5 | mm | 31,500...31,562 | 31,500...31,562 | ||
BE03.20-N-1003-02L | Main bearing journal width | mm | 31,0...31,2 | 31,0...31,2 | |
BE03.20-N-1004-02L | Connecting rod bearing journal dia. | Default | mm | 69,995...70,015 | 69,995...70,015 |
Deviation –0.1 | mm | 69,895...69,915 | 69,895...69,915 | ||
Deviation –0.25 | mm | 69,745...69,765 | 69,745...69,765 | ||
Deviation –0.5 | mm | 69,495...69,515 | 69,495...69,515 | ||
Deviation –0.75 | mm | 69,245...69,265 | 69,245...69,265 | ||
Deviation –1.0 | mm | 68,995...69,015 | 68,995...69,015 | ||
BE03.20-N-1005-02L | Connecting rod journal width | mm | 34,0...34,2 | 34,0...34,2 | |
BE03.20-N-1006-02L | Axial play | mm | 0,16...0,38 | 0,16...0,38 | |
BE03.20-N-1007-02L | Radial play | mm | 0,040...0,102 | 0,040...0,102 | |
BE03.20-N-1008-02L | Main and connecting rod bearing journals permissible out-of-roundness variation | Limit value | mm | 0,005 | 0,005 |
BE03.20-N-1009-02L | Permissible taper | Main bearing journals | mm | 0,005 | 0,005 |
Connecting rod bearing journals | mm | 0,005 | 0,005 | ||
BE03.20-N-1010-02L | Permissible lateral runout | Fit bearing journal | mm | 0,015 | 0,015 |
BE03.20-N-1011-02L | Variation in concentricity measured at middle main bearing journal (mounted at outer main bearing journals) | mm | 0,15 | 0,11 | |
BE03.20-N-1012-02L | Width of the fillet radius | Main bearing journals | mm | 2,65...3,00 | 2,65...3,00 |
Connecting rod bearing journals | mm | 3,65...4,00 | 3,65...4,00 | ||
BE03.20-N-1013-02L | Hardness of main bearing and connecting rod journals (Rockwell hardness) | HRC | 52 | 52 | |
BE03.20-N-1014-02L | Spherical shape | Main bearing journals | mm | 0,000...0,004 | 0,000...0,004 |
Connecting rod bearing journals | mm | 0,000...0,004 | 0,000...0,004 | ||
BE03.20-N-1015-02L | Main bearing inner diameter | Default | mm | 86,050...86,092 | 86,050...86,092 |
Deviation 0.1 | mm | 85,950...85,992 | 85,950...85,992 | ||
Deviation 0.25 | mm | 85,800...85,842 | 85,800...85,842 | ||
Deviation 0.5 | mm | 85,550...85,592 | 85,550...85,592 | ||
Deviation 0.75 | mm | 85,300...85,342 | 85,300...85,342 | ||
Deviation 1.0 | mm | 85,050...85,092 | 85,050...85,092 | ||
BE03.20-N-1016-02L | Wall thickness of fitted bearing thrust washers | Default | mm | 3,24...3,30 | 3,24...3,30 |
Deviation 0.3 | mm | 3,39...3,45 | 3,39...3,45 | ||
Deviation 0.5 | mm | 3,49...3,55 | 3,49...3,55 | ||
BE03.20-N-1017-02L | Basic bore Ø in crankcase | mm | 91,000...91,022 | 91,000...91,022 | |
BE03.20-N-1018-02L | Permissible runout of flange for crankshaft gear when resting on the outer crankshaft bearing journals | radial | mm | 0,03 | 0,03 |
lateral | mm | 0,03 | 0,03 | ||
BE03.20-N-1019-02L | Maximum approved deviation from perfect crankshaft balance (with flywheel mounting stud, but without flywheel) at the front and rear main bearings | gcm | 30 | – | |
BE03.20-N-1020-02L | Permissible alignment deviation of connecting rod bearings to crankshaft bearings, in relation to bearing lengths | mm | 0,1 | 0,1 | |
BE03.20-N-1021-02L | Permissible imbalance of crankshaft (with pin for locating flywheel but without flywheel), mounted at main bearings two and six | gcm | – | 30 |
Check values of crankshaft |
Number | Designation | ENGINE 902.912, 906.936/967 | ||
BE03.20-N-1001-02L | Main bearing journal diameter | Default | mm | 85,990...86,010 |
Deviation –0.1 | mm | 85,890...85,910 | ||
Deviation –0.25 | mm | 85,740...85,760 | ||
Deviation –0.5 | mm | 85,490...85,510 | ||
Deviation –0.75 | mm | 85,240...85,260 | ||
Deviation –1.0 | mm | 84,990...85,010 | ||
BE03.20-N-1002-02L | Fitted bearing journal width | Default | mm | 31,000...31,062 |
Deviation –0.3 | mm | 31,300...31,362 | ||
Deviation –0.5 | mm | 31,500...31,562 | ||
BE03.20-N-1003-02L | Main bearing journal width | mm | 31,0...31,2 | |
BE03.20-N-1004-02L | Connecting rod bearing journal dia. | Default | mm | 69,995...70,015 |
Deviation –0.1 | mm | 69,895...69,915 | ||
Deviation –0.25 | mm | 69,745...69,765 | ||
Deviation –0.5 | mm | 69,495...69,515 | ||
Deviation –0.75 | mm | 69,245...69,265 | ||
Deviation –1.0 | mm | 68,995...69,015 | ||
BE03.20-N-1005-02L | Connecting rod journal width | mm | 34,0...34,2 | |
BE03.20-N-1006-02L | Axial play | mm | 0,16...0,38 | |
BE03.20-N-1007-02L | Radial play | mm | 0,040...0,102 | |
BE03.20-N-1008-02L | Main and connecting rod bearing journals permissible out-of-roundness variation | Limit value | mm | 0,005 |
BE03.20-N-1009-02L | Permissible taper | Main bearing journals | mm | 0,005 |
Connecting rod bearing journals | mm | 0,005 | ||
BE03.20-N-1010-02L | Permissible lateral runout | Fit bearing journal | mm | 0,015 |
BE03.20-N-1011-02L | Variation in concentricity measured at middle main bearing journal (mounted at outer main bearing journals) | mm | 0,15 | |
BE03.20-N-1012-02L | Width of the fillet radius | Main bearing journals | mm | 2,65...3,00 |
Connecting rod bearing journals | mm | 3,65...4,00 | ||
BE03.20-N-1013-02L | Hardness of main bearing and connecting rod journals (Rockwell hardness) | HRC | 52 | |
BE03.20-N-1014-02L | Spherical shape | Main bearing journals | mm | 0,000...0,004 |
Connecting rod bearing journals | mm | 0,000...0,004 | ||
BE03.20-N-1015-02L | Main bearing inner diameter | Default | mm | 86,050...86,092 |
Deviation 0.1 | mm | 85,950...85,992 | ||
Deviation 0.25 | mm | 85,800...85,842 | ||
Deviation 0.5 | mm | 85,550...85,592 | ||
Deviation 0.75 | mm | 85,300...85,342 | ||
Deviation 1.0 | mm | 85,050...85,092 | ||
BE03.20-N-1016-02L | Wall thickness of fitted bearing thrust washers | Default | mm | 3,24...3,30 |
Deviation 0.3 | mm | 3,39...3,45 | ||
Deviation 0.5 | mm | 3,49...3,55 | ||
BE03.20-N-1017-02L | Basic bore Ø in crankcase | mm | 91,000...91,022 | |
BE03.20-N-1018-02L | Permissible runout of flange for crankshaft gear when resting on the outer crankshaft bearing journals | radial | mm | 0,03 |
lateral | mm | 0,03 | ||
BE03.20-N-1019-02L | Maximum approved deviation from perfect crankshaft balance (with flywheel mounting stud, but without flywheel) at the front and rear main bearings | gcm | – | |
BE03.20-N-1020-02L | Permissible alignment deviation of connecting rod bearings to crankshaft bearings, in relation to bearing lengths | mm | 0,1 | |
BE03.20-N-1021-02L | Permissible imbalance of crankshaft (with pin for locating flywheel but without flywheel), mounted at main bearings two and six | gcm | 30 |