Check values of crankshaft |
Number | Designation | ENGINE 900.9 | ENGINE 902.9, 906.9 except 906.901/902 | ||
BE03.20-N-1001-02K | Main bearing journal Ø | Standard | mm | 85,990...86,010 | 85,990...86,010 |
Deviation –0.1 | mm | 85,890...85,910 | 85,890...85,910 | ||
Deviation –0.25 | mm | 85,740...85,760 | 85,740...85,760 | ||
Deviation –0.5 | mm | 85,490...85,510 | 85,490...85,510 | ||
Deviation –0.75 | mm | 85,240...85,260 | 85,240...85,260 | ||
Deviation –1.0 | mm | 84,990...85,010 | 84,990...85,010 | ||
BE03.20-N-1002-02K | Fitted bearing journal width | Standard Ø | mm | 85,990...86,010 | 85,990...86,010 |
Standard width | mm | 31,000...31,062 | 31,000...31,062 | ||
Ø deviation -0.1 | mm | 85,890...85,910 | 85,890...85,910 | ||
Standard width | mm | 31,000...31,062 | 31,000...31,062 | ||
Ø deviation -0.1 | mm | 85,890...85,910 | 85,890...85,910 | ||
Width deviation 0.3 | mm | 31,300...31,362 | 31,300...31,362 | ||
Ø deviation -0.25 | mm | 85,740...85,760 | 85,740...85,760 | ||
Width deviation 0.3 | mm | 31,300...31,362 | 31,300...31,362 | ||
Ø deviation -0.5 | mm | 85,490...85,510 | 85,490...85,510 | ||
Width deviation 0.5 | mm | 31,500...31,562 | 31,500...31,562 | ||
Ø deviation -0.75 | mm | 85,240...85,260 | 85,240...85,260 | ||
Width deviation 0.5 | mm | 31,500...31,562 | 31,500...31,562 | ||
Ø deviation -1.0 | mm | 84,990...85,010 | 84,990...85,010 | ||
Width deviation 0.5 | mm | 31,500...31,562 | 31,500...31,562 | ||
BE03.20-N-1003-02K | Main bearing journal width | mm | 31,0...31,2 | 31,0...31,2 | |
BE03.20-N-1004-02K | Connecting rod bearing journal Ø | Standard | mm | 69,995...70,015 | 69,995...70,015 |
Deviation –0.1 | mm | 69,895...69,915 | 69,895...69,915 | ||
Deviation –0.25 | mm | 69,745...69,765 | 69,745...69,765 | ||
Deviation –0.5 | mm | 69,495...69,515 | 69,495...69,515 | ||
Deviation –0.75 | mm | 69,245...69,265 | 69,245...69,265 | ||
Deviation –1.0 | mm | 68,995...69,015 | 68,995...69,015 | ||
BE03.20-N-1005-02K | Connecting rod journal width | mm | 34,0...34,2 | 34,0...34,2 | |
BE03.20-N-1006-02K | Axial play | mm | 0,16...0,38 | 0,16...0,38 | |
BE03.20-N-1007-02K | Radial play | mm | 0,056...0,118 | 0,056...0,118 | |
BE03.20-N-1008-02K | Main and connecting rod bearing journals permissible out-of-roundness variation | Limit value | mm | 0,005 | 0,005 |
BE03.20-N-1009-02K | Permissible taper | Main bearing journals | mm | 0,005 | 0,005 |
Connecting rod journals | mm | 0,005 | 0,005 | ||
BE03.20-N-1010-02K | Permissible lateral runout | Fit bearing journal | mm | 0,20 | 0,20 |
BE03.20-N-1011-02K | Variation in concentricity measured at middle main bearing journal (mounted at outer main bearing journals) | mm | 0,11 | 0,15 | |
BE03.20-N-1012-02K | Fillet radii | Main bearing journals | mm | 2,5...3,0 | 2,5...3,0 |
Connecting rod journals | mm | 2,5...3,0 | 2,5...3,0 | ||
BE03.20-N-1013-02K | Hardness of main bearing and connecting rod journals (Rockwell hardness) | HRC | 52 | 52 | |
BE03.20-N-1014-02K | Spherical shape of piston ring | Main bearing journals | mm | 0,000...0,004 | 0,000...0,004 |
Connecting rod journals | mm | 0,000...0,004 | 0,000...0,004 | ||
BE03.20-N-1015-02K | Main bearing inner Ø | Standard | mm | 86,066...86,108 | 86,066...86,108 |
Deviation 0.1 | mm | 85,966...86,008 | 85,966...86,008 | ||
Deviation 0.25 | mm | 85,816...85,858 | 85,816...85,858 | ||
Deviation 0.5 | mm | 85,566...85,608 | 85,566...85,608 | ||
Deviation 0.75 | mm | 85,316...85,358 | 85,316...85,358 | ||
Deviation 1.0 | mm | 85,066...85,108 | 85,066...85,108 | ||
BE03.20-N-1016-02K | Wall thickness of fitted bearing thrust washers | Standard | mm | 3,240...3,310 | 3,240...3,310 |
Deviation 0.3 | mm | 3,390...3,460 | 3,390...3,460 | ||
Deviation 0.5 | mm | 3,490...3,560 | 3,490...3,560 | ||
BE03.20-N-1017-02K | Basic bore Ø in cylinder crankcase | mm | 91,000...91,022 | 91,000...91,022 | |
BE03.20-N-1018-02K | Permissible runout of flange for crankshaft gear when resting on the outer crankshaft bearing journals | radial | mm | 0,03 | 0,03 |
lateral | mm | 0,03 | 0,03 | ||
BE03.20-N-1019-02K | Maximum permissible deviation from perfect crankshaft balance (with flywheel mounting stud, but without flywheel) at the front and rear main bearings. | gcm | 30 | – | |
BE03.20-N-1020-02K | Permissible alignment variation of conrod bearings to crankshaft bearings, referred to bearing lengths | mm | 0,1 | 0,1 | |
BE03.20-N-1021-02K | Permissible imbalance of crankshaft (with pin for locating flywheel but without flywheel), mounted at main bearings two and six. | gcm | – | 30 |
Check values of crankshaft |
Number | Designation | ENGINE 906.901/902 | ENGINE 904.9 | ||
BE03.20-N-1001-02K | Main bearing journal Ø | Standard | mm | 85,990...86,010 | 85,990...86,010 |
Deviation –0.1 | mm | 85,890...85,910 | 85,890...85,910 | ||
Deviation –0.25 | mm | 85,740...85,760 | 85,740...85,760 | ||
Deviation –0.5 | mm | 85,490...85,510 | 85,490...85,510 | ||
Deviation –0.75 | mm | 85,240...85,260 | 85,240...85,260 | ||
Deviation –1.0 | mm | 84,990...85,010 | 84,990...85,010 | ||
BE03.20-N-1002-02K | Fitted bearing journal width | Standard Ø | mm | 85,990...86,010 | 85,990...86,010 |
Standard width | mm | 31,000...31,062 | 31,000...31,062 | ||
Ø deviation -0.1 | mm | 85,890...85,910 | 85,890...85,910 | ||
Standard width | mm | 31,000...31,062 | 31,000...31,062 | ||
Ø deviation -0.1 | mm | 85,890...85,910 | 85,890...85,910 | ||
Width deviation 0.3 | mm | 31,300...31,362 | 31,300...31,362 | ||
Ø deviation -0.25 | mm | 85,740...85,760 | 85,740...85,760 | ||
Width deviation 0.3 | mm | 31,300...31,362 | 31,300...31,362 | ||
Ø deviation -0.5 | mm | 85,490...85,510 | 85,490...85,510 | ||
Width deviation 0.5 | mm | 31,500...31,562 | 31,500...31,562 | ||
Ø deviation -0.75 | mm | 85,240...85,260 | 85,240...85,260 | ||
Width deviation 0.5 | mm | 31,500...31,562 | 31,500...31,562 | ||
Ø deviation -1.0 | mm | 84,990...85,010 | 84,990...85,010 | ||
Width deviation 0.5 | mm | 31,500...31,562 | 31,500...31,562 | ||
BE03.20-N-1003-02K | Main bearing journal width | mm | 31,0...31,2 | 31,0...31,2 | |
BE03.20-N-1004-02K | Connecting rod bearing journal Ø | Standard | mm | 69,995...70,015 | 69,995...70,015 |
Deviation –0.1 | mm | 69,895...69,915 | 69,895...69,915 | ||
Deviation –0.25 | mm | 69,745...69,765 | 69,745...69,765 | ||
Deviation –0.5 | mm | 69,495...69,515 | 69,495...69,515 | ||
Deviation –0.75 | mm | 69,245...69,265 | 69,245...69,265 | ||
Deviation –1.0 | mm | 68,995...69,015 | 68,995...69,015 | ||
BE03.20-N-1005-02K | Connecting rod journal width | mm | 34,0...34,2 | 34,0...34,2 | |
BE03.20-N-1006-02K | Axial play | mm | 0,16...0,38 | 0,16...0,38 | |
BE03.20-N-1007-02K | Radial play | mm | 0,056...0,118 | 0,056...0,118 | |
BE03.20-N-1008-02K | Main and connecting rod bearing journals permissible out-of-roundness variation | Limit value | mm | 0,005 | 0,005 |
BE03.20-N-1009-02K | Permissible taper | Main bearing journals | mm | 0,005 | 0,005 |
Connecting rod journals | mm | 0,005 | 0,005 | ||
BE03.20-N-1010-02K | Permissible lateral runout | Fit bearing journal | mm | 0,015 | 0,015 |
BE03.20-N-1011-02K | Variation in concentricity measured at middle main bearing journal (mounted at outer main bearing journals) | mm | 0,15 | 0,11 | |
BE03.20-N-1012-02K | Fillet radii | Main bearing journals | mm | 2,5...3,0 | 2,5...3,0 |
Connecting rod journals | mm | 2,5...3,0 | 2,5...3,0 | ||
BE03.20-N-1013-02K | Hardness of main bearing and connecting rod journals (Rockwell hardness) | HRC | 52 | 52 | |
BE03.20-N-1014-02K | Spherical shape of piston ring | Main bearing journals | mm | 0,000...0,004 | 0,000...0,004 |
Connecting rod journals | mm | 0,000...0,004 | 0,000...0,004 | ||
BE03.20-N-1015-02K | Main bearing inner Ø | Standard | mm | 86,066...86,108 | 86,066...86,108 |
Deviation 0.1 | mm | 85,966...86,008 | 85,966...86,008 | ||
Deviation 0.25 | mm | 85,816...85,858 | 85,816...85,858 | ||
Deviation 0.5 | mm | 85,566...85,608 | 85,566...85,608 | ||
Deviation 0.75 | mm | 85,316...85,358 | 85,316...85,358 | ||
Deviation 1.0 | mm | 85,066...85,108 | 85,066...85,108 | ||
BE03.20-N-1016-02K | Wall thickness of fitted bearing thrust washers | Standard | mm | 3,240...3,310 | 3,240...3,310 |
Deviation 0.3 | mm | 3,390...3,460 | 3,390...3,460 | ||
Deviation 0.5 | mm | 3,490...3,560 | 3,490...3,560 | ||
BE03.20-N-1017-02K | Basic bore Ø in cylinder crankcase | mm | 91,000...91,022 | 91,000...91,022 | |
BE03.20-N-1018-02K | Permissible runout of flange for crankshaft gear when resting on the outer crankshaft bearing journals | radial | mm | 0,03 | 0,03 |
lateral | mm | 0,03 | 0,03 | ||
BE03.20-N-1019-02K | Maximum permissible deviation from perfect crankshaft balance (with flywheel mounting stud, but without flywheel) at the front and rear main bearings. | gcm | – | 30 | |
BE03.20-N-1020-02K | Permissible alignment variation of conrod bearings to crankshaft bearings, referred to bearing lengths | mm | 0,1 | 0,1 | |
BE03.20-N-1021-02K | Permissible imbalance of crankshaft (with pin for locating flywheel but without flywheel), mounted at main bearings two and six. | gcm | 30 | – |
Check values of crankshaft |
Number | Designation | Engine 924.9, 925.9, 926.9 in model 000.001 | ||
BE03.20-N-1001-02K | Main bearing journal Ø | Standard | mm | 85,990...86,010 |
Deviation –0.1 | mm | 85,890...85,910 | ||
Deviation –0.25 | mm | 85,740...85,760 | ||
Deviation –0.5 | mm | 85,490...85,510 | ||
Deviation –0.75 | mm | 85,240...85,260 | ||
Deviation –1.0 | mm | 84,990...85,010 | ||
BE03.20-N-1002-02K | Fitted bearing journal width | Standard Ø | mm | 85,990...86,010 |
Standard width | mm | 31,000...31,062 | ||
Ø deviation -0.1 | mm | 85,890...85,910 | ||
Standard width | mm | 31,000...31,062 | ||
Ø deviation -0.1 | mm | 85,890...85,910 | ||
Width deviation 0.3 | mm | 31,300...31,362 | ||
Ø deviation -0.25 | mm | 85,740...85,760 | ||
Width deviation 0.3 | mm | 31,300...31,362 | ||
Ø deviation -0.5 | mm | 85,490...85,510 | ||
Width deviation 0.5 | mm | 31,500...31,562 | ||
Ø deviation -0.75 | mm | 85,240...85,260 | ||
Width deviation 0.5 | mm | 31,500...31,562 | ||
Ø deviation -1.0 | mm | 84,990...85,010 | ||
Width deviation 0.5 | mm | 31,500...31,562 | ||
BE03.20-N-1003-02K | Main bearing journal width | mm | 31,0...31,2 | |
BE03.20-N-1004-02K | Connecting rod bearing journal Ø | Standard | mm | 69,995...70,015 |
Deviation –0.1 | mm | 69,895...69,915 | ||
Deviation –0.25 | mm | 69,745...69,765 | ||
Deviation –0.5 | mm | 69,495...69,515 | ||
Deviation –0.75 | mm | 69,245...69,265 | ||
Deviation –1.0 | mm | 68,995...69,015 | ||
BE03.20-N-1005-02K | Connecting rod journal width | mm | 34,0...34,2 | |
BE03.20-N-1006-02K | Axial play | mm | 0,16...0,38 | |
BE03.20-N-1007-02K | Radial play | mm | 0,056...0,118 | |
BE03.20-N-1008-02K | Main and connecting rod bearing journals permissible out-of-roundness variation | Limit value | mm | 0,005 |
BE03.20-N-1009-02K | Permissible taper | Main bearing journals | mm | 0,005 |
Connecting rod journals | mm | 0,005 | ||
BE03.20-N-1010-02K | Permissible lateral runout | Fit bearing journal | mm | 0,020 |
BE03.20-N-1011-02K | Variation in concentricity measured at middle main bearing journal (mounted at outer main bearing journals) | mm | 0,15 | |
BE03.20-N-1012-02K | Fillet radii | Main bearing journals | mm | 2,5...3,0 |
Connecting rod journals | mm | 2,5...3,0 | ||
BE03.20-N-1013-02K | Hardness of main bearing and connecting rod journals (Rockwell hardness) | HRC | 52 | |
BE03.20-N-1014-02K | Spherical shape of piston ring | Main bearing journals | mm | 0,000...0,004 |
Connecting rod journals | mm | 0,000...0,004 | ||
BE03.20-N-1015-02K | Main bearing inner Ø | Standard | mm | 86,066...86,108 |
Deviation 0.1 | mm | 85,966...86,008 | ||
Deviation 0.25 | mm | 85,816...85,858 | ||
Deviation 0.5 | mm | 85,566...85,608 | ||
Deviation 0.75 | mm | 85,316...85,358 | ||
Deviation 1.0 | mm | 85,066...85,108 | ||
BE03.20-N-1016-02K | Wall thickness of fitted bearing thrust washers | Standard | mm | 3,240...3,310 |
Deviation 0.3 | mm | 3,390...3,460 | ||
Deviation 0.5 | mm | 3,490...3,560 | ||
BE03.20-N-1017-02K | Basic bore Ø in cylinder crankcase | mm | 91,000...91,022 | |
BE03.20-N-1018-02K | Permissible runout of flange for crankshaft gear when resting on the outer crankshaft bearing journals | radial | mm | 0,03 |
lateral | mm | 0,03 | ||
BE03.20-N-1019-02K | Maximum permissible deviation from perfect crankshaft balance (with flywheel mounting stud, but without flywheel) at the front and rear main bearings. | gcm | – | |
BE03.20-N-1020-02K | Permissible alignment variation of conrod bearings to crankshaft bearings, referred to bearing lengths | mm | 0,1 | |
BE03.20-N-1021-02K | Permissible imbalance of crankshaft (with pin for locating flywheel but without flywheel), mounted at main bearings two and six. | gcm | 30 |