Hollow cavity preservation following repair work

AR97.20-D-1500A

2.5.02

MODEL 901, 902, 903, 904, 905

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

N98.00-0635-09

A Hollow cavity preservation

1 Panel van/compact van frame

Figure item, etc.	Work instructions
 Danger!	Risk of explosion and poisoning. Solvent vapors and fumes are explosive and toxic. Risk of injury. Working with anticorrosion agents may result in eye and skin injuries.	Never spray anticorrosion agents on flames or glowing hot objects and keep them well away from all potential sources of ignition. Process in well-ventilated rooms, wear respiratory protection.	AS97.00-Z-0001-01A
	Notes on hollow cavity preservation		AH97.20-P-0001-01B
	Processing instructions for hollow cavity preservation		AP97.20-P-0640-01A
	Apply wax preservation agent in shaded areas following sealing and paintwork, however, before performing assembly work	Move spraying hose into hollow cavities as far as possible and slowly pull out hose while spraying
	Apply repair preservation agent twice with a drying time of 5 minutes in between.	The spraying hose should be stiff and the nozzles should spray at angle to the front and rear. The hollow cavities should be dry.
	Ensure that the drain holes are not plugged following drying.	The processing temperature should not be below + 15 °C Additional preservation measures may be required depending on the repair area deviating from the standard hollow cavity preservation illustrated.