Remove/install airbag unit on steering wheel

AR91.60-W-0660NA

Remove/install airbag unit on steering wheel

25.04.2018

Model

967

with code S3A (Airbag, driver)

Modification notes

13.12.2017

Safety notice AS91.00-Z-0008-01A added.

13.12.2017

Document contents have been revised.

1

Bolts

2

Steering wheel

3

Airbag

4

Electrical connector

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

 

Remove/install

1

Turn steering wheel 90° to the left

2

Switch off ignition

3

Disconnect ground line from battery

AR54.10-W-0003NA

4

Remove screws/bolts (1) at bottom on steering wheel (2)

 Bolt, airbag to steering wheel

*BA91.60-N-1001-01NA

 Screwdriver bit

*126589001000

5

Remove airbag (3) with attached electrical line from steering wheel (2)

6

Disconnect electrical connector (4) from airbag (3)

 Installation: The electrical connector (4) on airbag (3) must engage.

7

Install in the reverse order

8

Carry out function check

 The airbag indicator lamp should not come on when the wheels are fully turned in either direction.

9

Dispose of removed airbag (3) properly

Only if new airbag (3) was installed.

Update Vehicle Documentation (VeDoc)

10

Check VeDoc entry for airbag, update if necessary

Only if new airbag (3) was installed.

If the VPD entry for the airbag is missing from the data card

AR00.10-W-1000-01A

If the VPD entry for the airbag is in the data card

AR00.10-W-1000-01B

 Airbag

Number

Designation

Model 967

BA91.60-N-1001-01NA

Bolt, airbag to steering wheel

Nm

6