Remove/install side Supplemental Restraint System (SRS) pressure sensor

AR91.60-S-0760P

Remove/install side Supplemental Restraint System (SRS) pressure sensor

05.11.2019

Model

470, 471

1

Side deployment pressure sensor

2

Electrical connector

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Disconnect ground line at the on-board electrical system battery

AR54.10-S-0003P

2

Loosen adhesive film at front door inner door panel until side deployment pressure sensor (1) is accessible

AR72.10-S-1011P

3

Release (arrow A) and disconnect electrical connector (2)

4

Release side deployment pressure sensor (1) counterclockwise (arrow B) and remove from inner door panel

5

Install in the reverse order



Check

6

Check Supplemental Restraint System (SRS) with diagnostic system

If side deployment pressure sensor (1) has been replaced.



AD00.00-S-2000-06P