Remove/install rear seat cushion

AR91.12-P-1021MFA

Remove/install rear seat cushion

14.05.2020

Model

118, 177, 247

Modification notes

11.05.2020

Drive in wedge using hammer.

Operation step 3.

Shown on model 177.0 except code 293 (Side airbag in the rear on left and right)

1

Seat cushion

2

Front retaining bracket

3

Rear retaining bracket

Shown on model 247.6 with code 293 (Side airbag in the rear on left and right)

1

Seat cushion

2

Front retaining bracket

3

Rear retaining bracket

Shown on model 177.0 with code 293 (Side airbag in the rear on left and right)

3.1

Mounting hook

4

Electrical connectors

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

 

Remove/install

1

Move front seat to foremost position.

2

Disconnect ground line from battery.

Model 118, 177, 247
with code 293 (Sidebag in rear left and right)

AR54.10-P-0003MFA

3

Release front retaining brackets (2) with wedge upward out of pilot bushings and position seat cushion (1) upward at an angle.

 Removal:
Only pull lightly by hand on outer side bolsters.
Otherwise, the seat cushion (1) will be damaged.

 Removal: Drive in wedge evenly using a hammer to release seat cushion (1).

 Installation: Replace pilot bushings.

 Wedge

*601589076300

4

Press inclined seat cushion (1) at the same time backwards against the seat backrest and unhook rear mounting frame bows (3) out of mounting hooks (3.1).

 Installation: Readjust seat cushion (1) again after successful installation and smooth out any folds in the seat cover.

 Installation: Ensure that rear mounting frame bows (3) are correctly seated in mounting hooks  (3.1).

5

Release and disconnect electrical connectors (4) and remove cable ties of electrical lines.

Model 118, 177, 247
with code 293 (Sidebag in rear left and right)

 Installation: Replace cable ties.

6

Remove seat cushion (1) from vehicle.


Carefully remove seat cushion (1) from vehicle.
Otherwise, component parts of the vehicle get damaged.

 Installation: Guide seat belt buckles through the seat cushion (1).

 Installation: Ensure that the ISOFIX/i-Size covers have not been pushed out.

7

Install in the reverse order.