AR91.10-W-3370B | Remove/install Bowden cable for quick seat lowering | 9.7.98 |
MODEL 950.###, 952.###, 953.###, 954.### ## up to 516699
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer"comfort passenger suspension seat
MODEL 970.###, 972.###, 974.###, 975.###, 976.### ## up to 516699
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer" comfort passenger suspension seat
W91.10-1008-06
1 Gaiter plug
2 Bellows
3 Bolt
4 Bracket
5 Bowden cable
6 Seat quick lowering handle
7 Left trim panel
8 Backrest adjusting handle
9 Bolt
10 Handle
11 Level control
12 Seat belt
13 Bolt
14 Nut
| Remove/Install | ||
1.1 | Remove seat and console | Models 950.0/1/2/3, 952.0/1/2/3, 953.1/3, 954.0/1/2 | |
1.2 | Remove front seat | Models 950.5/6, 952.5/6, 953.6, 954.6, 970, 972, 974, 975, 976 | |
2 | Remove seat cushion | ||
3 | Remove control unit for lumbar spine support | ||
4 | Remove handle of backrest adjustment (8) | ||
5 | Remove trim panel (7) on left side | ||
6 | Remove gaiter plug (1) and put CV boot (2) down | ||
7 | Unscrew bolts (3) and remove grab rail (10) | ||
8 | Remove rapid seat lowering handle (6) | Remove the bolt (9) in a forward direction until the rapid seat lowering handle can be removed. | |
9 | Remove bolts (13) | Slowly roll up belt (12). | |
10 | Unscrew nuts (14) from below and lift out level control (11) | Tilt seat to side | |
Model 950, 952, 953, 954 | |||
Models 970, 972, 974, 975, 976 | |||
11 | Detach Bowden cable (5) from level control (11) | ||
12 | Remove bracket (4) and detach Bowden cable (5) | ||
13 | Install in the reverse order |
Seats
Number | Designation | Models 950.5/6, 952.5/6, 953.6, 954.5 | Models | |
BA91.10-N-1003-02A | Nut for level control to rocker | Nm | 25 | 25 |
Seats