AR91.10-W-3300A | Remove/install seat with console | 5.12.06 |
MODEL 930, 932, 933, 934 with BODY 943.899
MODEL 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2 with BODY 942.899
W91.10-1007-11
Shown with code (SH1) "Grammer" comfort driver suspension seat
1 Bolt
2 Pneumatic connector
3 Electrical connector
| Remove/install | ||
1 | Switch off ignition | ||
2 | Fold back front floor mat | ||
3 | Unscrew rear bolts (1) of the seat console | Model 950, 952, 953, 954 | |
Model 930, 932, 933, 934 | |||
4 | Disconnect pneumatic connector (2) and electrical connector (3) | Only for suspension seat and reclining seat. To disconnect the pneumatic connector (2) and electrical connector (3), tilt seat forward and secure to make sure that it will not tip back. | |
5 | Unscrew front bolts (1) of seat console | Model 950, 952, 953, 954 | |
Model 930, 932, 933, 934 | |||
6 | Remove seat | ||
7 | Install in the reverse order |
Seats
Number | Designation | Model | |
BA91.10-N-1001-02A | Bolt, seats at cab floor | Nm | 28 |
Seats