AR88.40-D-3000A | Removing and installing engine hood | 17.2.96 |
MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4
D88.00-0016-09
1 Engine hood
2 Hood support
5 Hinge
6 Collared nut
3 Collar bolt
4 Washers
| Removing | ||
1 | Unscrew collar nuts (6) at the hinge (5) | Support engine hood to prevent damage | |
2 | Unscrew hood support (2) and remove engine hood | ||
| Installation | ||
3 | Place engine hood on hinges (5) | Only position collar nuts and do not tighten | |
4 | Install hood support and bolt securely | ||
5 | Adjust engine hood | ||
6 | Grease hinges (5) |