ar8840d3000a

Removing and installing engine hood

Type ar · topic 88.40 · version 0103 · 2001-05-11

Applies to: MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.40 Engine hood, front flap — Series 901 (models 0**, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 4**) · Series 904 (models 0**, 3**, 4**)

EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.30 Engine hood — Series 901 (models 0**, 3**, 4**) · Series 902 (models 0**, 3**, 4**) · Series 903 (models 0**, 3**, 4**) · Series 904 (models 0**, 3**, 4**)

AR88.40-D-3000A

Removing and installing engine hood

17.2.96

MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Removing and installing engine hood

D88.00-0016-09

1 Engine hood

2 Hood support

5 Hinge

6 Collared nut

3 Collar bolt

4 Washers

Removing

1

Unscrew collar nuts (6) at the hinge (5)

Support engine hood to prevent damage

2

Unscrew hood support (2) and remove engine hood

Installation

3

Place engine hood on hinges (5)

Only position collar nuts and do not tighten

4

Install hood support and bolt securely

5

Adjust engine hood

AR88.40-D-3020A

6

Grease hinges (5)

Referenced documents