P88.20-0211-09
1 Filler element (foam rubber)
2 Clip
3 Cover
4 Flap (installation opening)
”A” Distance between guide/fender
”B” Gap
5 Nut
6 Washer
7 Bumper
8 Guide
| Removal, installation | ||
1 | Open trunk lid | ||
2 | Remove filler element (1) | ||
3 | Remove clip (2) | ||
4 | Pull cover (3) on side out below center cover | ||
5 | Open flap (4) | ||
6 | Unscrew nuts (5) and remove washers (6) | | |
7 | Remove bumper (7) | When removing bumper pull outward slightly at wheelhouse | |
Installation: Check gap | |||
if necessary adjust by correcting guide (basic adjustment dimension | |||
8.1 | Transfer AMG bumper | See accessory installation instructions | |
Retrofitting AMG paneling sections | |||
9 | Reinstall in opposite order |
Gap dimensions for bumper
Number | Designation | Model 202 | ||
BE88.20-P-1002-01A | Di-men-sion | Rear bumper, gap dimension "B" | mm | 6 |
See figure | ||||
Bumper